Bedienungsanleitung Liebherr SIBa 3950 (Seite 7 von 18) (Englisch)

805381

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Recommended storage periods with HumidityPlus acti‐

vated

Peaches at 1 °C up to 13 days

Plums at 1 °C up to 20 days

Cranberries at 1 °C up to 60 days

Rhubarb at 1 °C up to 13 days

Gooseberries at 1 °C up to 13 days

Grapes at 1 °C up to 29 days

5 Saving energy

-Pay attention to good ventilation. Do not cover ventilation

holes or grids.

-Always keep the fan air slits clear.

-Do not install the appliance in direct sunlight, next to an

oven, radiator or similar.

-Energy consumption depends on the installation condi‐

tions, e.g. the ambient temperature (see 1.3 Appliance

range of use) . A warmer ambient temperature can

increase the energy consumption.

-Open the appliance for as short a time as possible.

-The lower the temperature is set the higher the energy

consumption.

-Keep all food properly packed and covered. This prevents

frost from forming.

-Only take food out for as long as necessary so that it

doesn’t warm up too much.

-Inserting warm food: allow to cool down to room temper‐

ature first.

6 Controls

6.1 Controls and displays

The display provides a quick overview of the temperature

setting and the status of functions and settings. You

can control the functions and settings either by deacti‐

vating/activating them or by selecting a value.

6.1.1 Status display

Fig. 5

(1) Temperature display

The Status display shows the set temperatures and is the

home display. From there, you can navigate to the options

and settings.

6.1.2 Navigation

Navigate in the menu to access the individual functions.

An audible signal sounds after confirming a function or

setting. If no selection is made after 10 seconds the display

switches to the Status display.

The appliance is operated by swiping and confirming in the

display:

Fig. 6

Back:

-Confirm your selection in the submenu. The display

returns to the menu.

. The display returns to the function/setting.

Back to Status display:

-Close and open the door.

-Wait 10 seconds. The display switches to the Status

display.

6.1.3 Display symbols

Display symbols provide information on the current appli‐

ance status:

Symbol Appliance status

Standby

The appliance or temperature zone

is switched off.

Flashing number

Appliance is working. Temperature

flashes until the set temperature is

reached.

Flashing symbol

Appliance is working. Setting is

made.

6.2 Control concept

6.2.1 Activating/deactivating the function

You can activate/deactivate the following functions:

Symbol Function

HumidityPlus

x When function is on, the appliance works harder. This

means appliance noise when operating may be louder for

a short while, and more energy will be consumed.

uSwipe left in the display until the function appears.

uConfirm selected function with a short tap.

wYou hear the confirmation tone.

wStatus appears in the menu.

wFunction is on/off.

6.2.2 Selecting function value

With the following functions you can set a value in the

submenu:

Saving energy

* Depending on model and options 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr SIBa 3950 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr SIBa 3950

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info