Bedienungsanleitung Liebherr SIFNf 5108 (Seite 8 von 20) (Englisch)

805397

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

•Set a new value: Press Confirm Fig. 5 (2) to select an

active value Fig. 6 (1).

•Back to the menu: Press Confirm Fig. 5 (2) to select the

active value Fig. 6 (2).

6.1.4 Display symbols

Display symbols provide information on the current appli‐

ance status:

Symbol Appliance status

Standby

The appliance or temperature zone

is switched off.

Flashing number

Appliance is working. Temperature

flashes until the set value is

reached.

Flashing symbol

Appliance is working. Setting is

made.

Bar grows steadily

Function is activated.

6.2 Control concept

6.2.1 Activating/deactivating the function

You can activate/deactivate the following functions:

Symbol Function

PowerCoolx

SuperFrostx

PartyModex

E-Saver

x When function is on, the appliance works harder. This

means appliance noise when operating may be louder for

a short while, and more energy will be consumed.

uPress the navigation arrows Fig. 5 (1) repeatedly until the

function is displayed.

uPress Confirm Fig. 5 (2).

wYou hear the confirmation tone.

wStatus appears in the menu.

wFunction is on/off.

6.2.2 Selecting function value

With the following functions you can set a value in the

submenu:

Symbol Function

Setting the temperature

Switch the appliance on/off

uTap the navigation arrows Fig. 5 (1) repeatedly until the

function is displayed.

uPress Confirm Fig. 5 (2).

uSelect the setting value with the navigation arrows

Fig. 5 (1).

Setting the temperature

uPress Confirm Fig. 5 (2).

wYou hear the confirmation tone.

wStatus: On Fig. 6 (1) appears briefly in the submenu

Fig. 7 (4).

wDisplay switches back to the menu.

6.2.3 Activating/deactivating settings

You can activate/deactivate the following settings:

Symbol Setting

WiFi1

Entry lock2

SabbathMode2

Reset2

Switch off 2

uTap the navigation arrows Fig. 5 (1) repeatedly until the

settings appear.

uPress Confirm Fig. 5 (2).

uTap the navigation arrows Fig. 5 (1) repeatedly until the

desired setting is displayed.

1 Activate setting (shortpress)

uPress Confirm Fig. 5 (2).

wYou hear the confirmation tone.

wStatus appears in the menu.

wSetting is on / off.

2 Activate setting (longpress)

uTo Confirm Fig. 5 (2), press for 3 seconds.

wYou hear the confirmation tone.

wStatus appears in the menu.

wDisplay changes.

6.2.4 Selecting the setting value

With the following settings you can set a value in the

submenu:

Symbol Settings

Brightness

Door alarm

uTap the navigation arrows Fig. 5 (1) repeatedly until

settings appears.

uPress Confirm Fig. 5 (2).

uTap the navigation arrows Fig. 5 (1) repeatedly until the

desired setting is displayed.

uPress Confirm Fig. 5 (2).

uSelect the setting value with the navigation arrows

Fig. 5 (1).

uPress Confirm Fig. 5 (2).

wYou hear the confirmation tone.

wStatus appears briefly in the submenu.

wDisplay switches back to the menu.

6.2.5 Go to the Customer menu

You can see the following settings in the Customer menu:

Controls

8 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr SIFNf 5108 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr SIFNf 5108

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info