Bedienungsanleitung Liebherr SIFNSf 5128 (Seite 7 von 20) (Englisch)

805399

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Recommended storage period for various types of food

Poultry, beef at -18 °C 6 to 12 months

Vegetables, fruit at -18 °C 6 to 12 months

5 Saving energy

-Pay attention to good ventilation. Do not cover ventilation

holes or grids.

-Always keep the fan air slits clear.

-Do not install the appliance in direct sunlight, next to an

oven, radiator or similar.

-Energy consumption depends on the installation condi‐

tions, e.g. the ambient temperature (see 1.4 Appliance

range of use) . A warmer ambient temperature can

increase the energy consumption.

-Open the appliance for as short a time as possible.

-The lower the temperature is set the higher the energy

consumption.

-Keep all food properly packed and covered. This prevents

frost from forming.

-Inserting warm food: allow to cool down to room temper‐

ature first.

-If there is a thick layer of frost in the appliance: defrost

the appliance.*

6 Controls

6.1 Controls and displays

The display provides a quick overview of the temperature

setting and the status of functions and settings. You

can control the functions and settings either by deacti‐

vating/activating them or by selecting a value.

6.1.1 Status display

Fig. 4

(1) Temperature display

The Status display shows the set temperature and is the

home display. From there, you can navigate to the options

and settings.

6.1.2 Navigation

Navigate in the menu to access the individual functions.

An audible signal sounds after confirming a function or

setting. If no selection is made after 10 seconds the display

switches to the Status display.

The appliance is operated with the buttons next to the

display.

Fig. 5

(1) Navigation arrow left/

right

(2) Confirm

Navigation arrow left/right Fig. 5 (1):

-Navigating in the menu. After the last menu page, it goes

back to the first one.

Confirm Fig. 5 (2):

-Activating/deactivating a function.

-Open a submenu.

-Confirm a selection. After confirmation the display

switches back to the menu.

Back to Status display: in the fastest manner:

-Close and open the door.

-or wait 10 seconds. The display switches to the Status

display.

6.1.3 Operating structure

The controls are explained by a template. The display

changes depending on the function or settings.

Menus without a submenu

Fig. 6

(1) Status deactivated /

status activated white

bar in the top area

(3) Menu: Function name or

menu: Setting name

(2) Symbol or activated

value

Menus with a submenu

Fig. 7

(1) Menu: Function name

or menu: Setting name

(3) Symbol or activated

value

(2) Status (4) Submenu: function name

or submenu: Setting

name

(2) off / on

You can navigation as follows:

-Press the left/right Fig. 5 (1) arrow to navigate.

-Press Confirm Fig. 5 (2) to open the submenu Fig. 7 (4).

•Press the left/right Fig. 5 (1) arrow to navigate.

Saving energy

* Depending on model and options 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr SIFNSf 5128 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr SIFNSf 5128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info