Bedienungsanleitung Liebherr TP 1434-21 (Seite 5 von 14) (Englisch)

710410

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

DANGER identifies a situation involving direct

danger which, if not obviated, may

result in death or severe bodily

injury.

WARNING identifies a dangerous situation

which, if not obviated, may result in

death or severe bodily injury.

CAUTION identifies a dangerous situation

which, if not obviated, may result in

minor or medium bodily injury.

NOTICE identifies a dangerous situation

which, if not obviated, may result in

damage to property.

Note It contains useful instructions and

tips.

3 Controls and displays

3.1 Operating controls

Fig. 3

(1) Temperature controller (2) Cool-Plus switch

4 Putting into operation

4.1 Transporting the appliance

uTransport the appliance only in suitable packaging.

uTransport the appliance upright.

uDo not transport the appliance on your own.

4.2 Installing the appliance

WARNING

Fire hazard due to dampness!

If live parts or the mains lead become damp this may cause

short circuits.

uThe appliance is designed for use in enclosed areas. Do

not operate the appliance outdoors or in areas where it is

exposed to splash water or damp conditions.

WARNING

Improper use!

Fire. If a mains cable/plug comes into contact with the back

of the appliance, the mains cable/plug can be damaged by

appliance vibrations and this may result in a short circuit.

uStand the appliance so that it is not touched by connectors

or main cables.

uDo not connect any appliances to sockets in the area of the

back of the appliance.

uMulti-sockets/power distributors and other electronic appli-

ances (such as halogen transformers) may not be placed

and operated at the back of appliances.

WARNING

Leaking coolant and oil!

Fire. The coolant contained in the appliance is eco-friendly,

but also flammable. The oil contained in the appliance is flam-

mable. Escaping coolant and oil can ignite if the concentration

is high enough and in contact with an external heat source.

uDo not damage the pipelines of the coolant circuit and the

compressor.

WARNING

Fire hazard and danger of damage!

uDo not place appliances emitting heat e.g. microwaves,

toasters etc. on the appliance!

NOTICE

Risk of damage due to condensation!

Mould and corrosion. Due to heat not being able to escape,

condensation can form between two appliances and this can

cause the appliances to be affected by mould or corrode.

uDo not place the appliance directly on top of another fridge/

freezer.

NOTICE

Covered vents!

Damage. Appliance can overheat, which can reduce the

service life of various parts of the appliance and lead to opera-

tional impairments.

uAlways make sure there is good ventilation.

uAlways keep vents or ventilation grids in the appliance

housing and in the kitchen furniture (fully integrated appli-

ance) unobstructed.

NOTICE

Risk of damage due to condensate!

uDo not install the appliance directly alongside a further

refrigerator/freezer.

qBefore you connect the appliance, report any damage imme-

diately to the delivery company.

qThe floor of the installation site must be horizontal and even.

qDo not install the appliance in direct sunlight, next to an

oven, radiator or similar.

qInstall the appliance with the rear panel up against the wall

and always use the supplied wall spacers (see below).

qOnly ever move the appliance when it is empty.

qThe surface supporting the appliance must be at the same

level as the surrounding floor.

qDo not install the appliance on your own.

qThe more coolant there is in the appliance, the larger the

room in which the appliance is installed must be. If the room

is too small, any leak may create a flammable mixture of gas

and air. For each 8 g of coolant the installation space must

be at least 1 m3. Information on the coolant is on the model

plate inside the appliance.

uDetach the connecting cable from the rear of the appliance,

removing the cable holder at the same time because other-

wise there will be vibratory noise!

uRemove the protective film from the outside of the appli-

ance.*

uRemove the protective film from the decorative trims.

uRemove all transit supports.

The spacers supplied with some appliances must be used to

achieve the stated energy consumption. These will extend the

depth of the appliance by approx. 35 mm. The appliance is fully

functional if the spacers are not used, but does have a slightly

higher energy consumption.

Controls and displays

* Depending on model and options 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr TP 1434-21 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr TP 1434-21

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info