Bedienungsanleitung Liebherr UIK 1514 (Seite 9 von 12) (Englisch)

715452

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

WARNING

Unprofessional repair!

Injuries.

uHave any repairs and action - not expressly specified -

on the appliance and mains cable carried out by service

personnel only. (see 6 Maintenance)

uA damaged mains cable may only be replaced by the

manufacturer, the manufacturer’s Customer Service or a

similarly qualified person.

uIn the case of appliances with an IEC connector, the

change may be made by the customer.

uRead the appliance

designation Fig. 7 (1),

service No. Fig. 7 (2)

and serial No.

Fig. 7 (3) off the

model plate located

inside the appliance

on the left-hand

side.

Fig. 7

uNotify the customer service, specifying the fault, appli‐

ance designation Fig. 7 (1), service No. Fig. 7 (2) and serial

No. Fig. 7 (3).

wThis will help us to provide you with a faster and more

accurate service.

uKeep the appliance closed until the customer service

arrives.

wThe food will stay cool longer.

uPull out the mains plug (not by pulling the connecting

cable) or switch off the fuse.

6.4 Energy efficiency class lighting*

Lighting

Energy efficiency class1Light source

This product contains an energy efficiency

class G light source

LED

1 The appliance may contain light sources with different

energy efficiency classes. The lowest energy efficiency class

is indicated.

7 Malfunctions

Your appliance is designed and manufactured for a long

life span and reliable operation. If a malfunction nonethe‐

less occurs during operation, check whether it is due to a

handling error. In this case you will have to be charged for

the costs incurred, even during the warranty period. You

may be able to rectify the following faults yourself:

Defect Cause Remedy

Appliance does not

work.

→ The appliance is not switched on. uSwitching on the appliance.

→The power plug is not properly

inserted in the wall socket.

uCheck power plug.

→ The fuse of the wall socket is not in

order.

uCheck fuse.

The compressor

runs for a long

time.

→The compressor switches to a

low speed when little cold is

needed. Although the running time

is increased as a result, energy is

saved.

uThis is normal in energy-saving models.

→ SuperCool is activated. uThe compressor runs for longer in order to rapidly cool

the food. This is normal.

A LED on the

bottom rear of

the appliance (at

the compressor)

flashes repeatedly

every 5 seconds*.

→ There is a fault. uPlease contact the after-sales service (see 6 Mainte‐

nance) .

Excessive noise. →Due to the various speed steps,

speed-regulated* compressors can

generate different running noises.

uThe sound is normal.

A bubbling and

gurgling noise.

→This noise comes from the refrig‐

erant flowing in the refrigeration

circuit.

uThe sound is normal.

A quiet clicking

noise.

→The noise is produced whenever

the refrigeration unit (motor) auto‐

matically switches on or off.

uThe sound is normal.

A hum. It is briefly

a little louder

when the refrig‐

eration unit (the

→The refrigeration increases auto‐

matically when the SuperCool

function is activated, fresh food

has just been placed in the appli‐

uThe sound is normal.

Malfunctions

* Depending on model and options 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr UIK 1514 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr UIK 1514

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info