Bedienungsanleitung Liebherr UIKo 1550 (Seite 15 von 20) (Englisch)

715454

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

wDust deposits increase energy consumption.

uClean plastic outer and inner surfaces with lukewarm

water and a little washing-up liquid.

uClean drain hole:

Remove deposits

with a narrow instru‐

ment, e.g. a cotton

bud.

uMost of the parts can be dismantled for cleaning: see the

relevant chapter.

Fig. 33

uRemoving the shelf: Lift the shelf at the back and draw it

forwards, as illustrated.

Note

uIf the shelf can no longer be extended as far as origi‐

nally, then extend the telescopic rails all the way. The

ball retainers of the telescopic rails are realigned in the

process and maximum extension is restored.

uOnly use a damp cloth to clean the telescopic rails. The

grease in the runners is for lubrication purposes and

must not be removed.

uTo disassemble the cabinet:Lift the inner retaining rods

upwards, pull the brackets out. This releases the front

and rear retaining rods as well as the glass panel.

Fig. 34

uInserting the shelf: Retract the telescopic rails.

uPlace the shelf on the telescopic rails, push it to the back

until it audibly engages.

After cleaning:

uWipe dry the appliance and items of equipment.

uConnect the appliance and switch it on again.

When the temperature is sufficiently cold:

uPut the food back inside.

6.3 Customer service

First check whether you can rectify the fault yourself

(see 7 Malfunctions) . If you cannot rectify the problem,

contact Customer Services. You can find the address in the

enclosed Customer Service Directory.

WARNING

Unprofessional repair!

Injuries.

uHave any repairs and action - not expressly specified -

on the appliance and mains cable carried out by service

personnel only. (see 6 Maintenance)

uA damaged mains cable may only be replaced by the

manufacturer, the manufacturer’s Customer Service or a

similarly qualified person.

uIn the case of appliances with an IEC connector, the

change may be made by the customer.

uRead the appli‐

ance designation

Fig. 35 (1), service

No. Fig. 35 (2) and

serial No. Fig. 35 (3)

off the model plate

located inside the

appliance on the

left-hand side.

Fig. 35

uNotify the customer service, specifying the fault, appli‐

ance designation Fig. 35 (1), service No. Fig. 35 (2) and

serial No. Fig. 35 (3).

wThis will help us to provide you with a faster and more

accurate service.

uKeep the appliance closed until the customer service

arrives.

wThe food will stay cool longer.

uPull out the mains plug (not by pulling the connecting

cable) or switch off the fuse.

6.4 Energy efficiency class lighting*

Lighting

Energy efficiency class1Light source

This product contains an energy efficiency

class G light source

LED

1 The appliance may contain light sources with different

energy efficiency classes. The lowest energy efficiency class

is indicated.

7 Malfunctions

Your appliance is designed and manufactured for a long

life span and reliable operation. If a malfunction nonethe‐

less occurs during operation, check whether it is due to a

handling error. In this case you will have to be charged for

Malfunctions

* Depending on model and options 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr UIKo 1550 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr UIKo 1550

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info