Bedienungsanleitung Liebherr WKEes 553 GrandCru (Seite 7 von 8) (Englisch)

597669

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Shutting your appliance down

If your appliance is to be shut down for any length of time, switch

it o and disconnect the plug or switch o or unscrew the fuse.

Clean the appliance and leave the door open in order to prevent

unpleasant smells.

The appliance complies with the relevant safety regulations and

EU Directives 2014/30/EU and 2014/35/EU.

Interior light

The interior light will always switch on when the appliance door

is opened.

Press the Light button if you want the interior light to be

on even when the door is closed.

Furthermore, the brightness of the lighting can be adjusted.

• Press the Light button.

• Press and hold the Light button

and at the same time press the

temperature setting buttons to in-

crease or decrease the brightness.

The light intensity of the LED light corresponds to laser

class 1/1M.

Important

The light cover may only be removed by customer service

sta.

If the cover is removed, do not look directly at the light

through optical lenses from close distance. This can dam-

age your eyes.

Air exchange with activated charcoal lter

The way in which wines continue to mature depends on the ambient

conditions. The quality of the air is therefore decisive for preserv-

ing the wine. We recommend that you replace the illustrated lter

once a year. Filters can be obtained from your dealer.

Changing the lter:

Take the lter by the handle.

Turn it 90° to the left or right

and remove.

Inserting the lter:

Insert with the handle in a verti-

cal position. Turn it 90° to the left

or right until it clicks into place.

Saving energy

- Always ensure good ventilation. Do not cover ventilation open-

ings or grille.

- Always keep fan louvres clear.

- Do not place appliance in areas of direct sunlight or next to a

stove, heater or similar object.

- The energy consumption depends on the installation conditions,

e.g. the ambient temperature.

- Keep the time the appliance is open to a minimum. Cleaning

B e f o r e c l e a n i n g , a lw a ys s wi t c h o  t h e a p p l i a n c e . D i s c o n n e c t

from the mains or switch o or unscrew the fuse.

• Clean the inside and outer walls with lukewarm water and a lit-

tle detergent. Do not use abrasive or acid cleaners or chemical

solvents.

• Use a glass cleaner to clean the glass surfaces and a commercially

available stainless-steel cleaning agent for the stainless-steel

surfaces.

Do not use steam cleaners because of the

risk of injury and damage.

• Ensure that no cleaning water penetrates into the elec trical

components or ventilation grille.

• Do not damage or remove the type plate on the inside of the

appliance. It is very important for servicing purposes.

Malfunctions

• F1 appears in the display.

– The appliance has suffered a fault. Contact the customer service

department.

You may be able to rectify the following faults by checking

the possible causes yourself.

• Appliance does not function:

– Is the appliance switched on?

– Is the plug correctly fitted in the mains socket?

– Is the fuse intact?

• When inserting the mains plug, the refrigeration unit does

not switch on, but a value is shown in the temperature

display.

– Demo mode is activated. Contact the customer service depart-

ment.

• Loud running noise:

– Is the appliance set up firmly on the floor?

– Does the appliance cause nearby items of furniture or objects to

vibrate? Please note that noises caused by the refrigerant circuit

cannot be avoided.

• The temperature is not low enough:

– Is the temperature setting correct (see "Setting the temperature")?

– Does the separately installed thermometer show the correct

reading?

– Is the ventilation system working properly?

– Is the appliance set up too close to a heat source?

If none of the above causes

apply and you cannot rectify

the fault yourself, contact the

nearest customer service de-

partment stating the type des-

ignation (1), service number (2)

and appliance number (3) as

indicated on the type plate.

The position of the type plate is shown in the section entitled

Description of the appliance.

Lighting

Class1Light source

This product contains a light source that

meets energy eciency rating G LED

1 The appliance may contain light sources with dierent energy

eciency classes. The lowest energy eciency class is

indicated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr WKEes 553 GrandCru Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr WKEes 553 GrandCru

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info