Bedienungsanleitung Liebherr WTes 5872 Vinidor (Seite 8 von 14) (Englisch)

597663

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Cleaning

Before cleaning always switch o the appliance. Pull out

the mains plug or switch o or unscrew the fuse.

• Clean the inside and outer walls with lukewarm water and a lit-

tle detergent. Do not use abrasive or acid cleaners or chemical

solvents.

• Use a glass cleaner to clean the glass surfaces and a commercially

available stainless-steel cleaning agent for the stainless-steel

surfaces.

Do not use steam cleaners because of the

risk of injury and damage.

• Ensure that no cleaning water penetrates into the elec trical

components or ventilation grille.

• Do not damage or remove the type plate on the inside of the

appliance. It is very important for servicing purposes.

Malfunctions

• F1, F3, F8, E1, E2, E3, E7, E8 or E9 appears in the display.

– The appliance has suffered a fault. Contact the customer service

department.

You may be able to rectify the following faults by checking the

possible causes yourself.

• Appliance does not function:

– Is the appliance switched on?

– Is the plug correctly fitted in the mains socket?

– Is the fuse intact?

• When inserting the mains plug, the refrigeration unit does

not switch on, but a value is shown in the temperature

display.

– Demo mode is activated. Deactivate demo mode as described

in the section entitled Additional functions - Demo mode.

• Loud running noise:

– Is the appliance set up firmly on the floor?

– Does the appliance cause nearby items of furniture or objects to

vibrate? Please note that noises caused by the refrigerant circuit

cannot be avoided.

• The temperature is not low enough:

– Is the temperature setting correct (see "Setting the temperature")?

– Does the separately installed thermometer show the correct

reading?

– Is the ventilation system working properly?

– Is the appliance set up too close to a heat source?

If none of the above causes

apply and you cannot rectify

the fault yourself, contact the

nearest customer service de-

partment stating the type des-

ignation

, service number

and appliance number

indicated on the type plate.

The position of the type plate is shown in the section entitled

Description of the appliance.

Storage diagram

for 0.75 l Bordeaux bottles to standard NF H 35-124

Total 178 bottles

Important

The maximum load per wooden shelf is 35 kg.

Number of bottles

Shutting your appliance down

If your appliance is to be shut down for any length of time, switch

it o and disconnect the plug or switch o or remove the fuse.

Clean the appliance and leave the door open in order to prevent

unpleasant smells.

The appliance complies with the relevant safety regulations and

EU Directives 2014/30/EU and 2014/35/EU.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr WTes 5872 Vinidor Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr WTes 5872 Vinidor

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info