Bedienungsanleitung Liebherr WTes 5972 Vinidor (Seite 9 von 16) (Englisch)

597664

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Malfunctions

• F1, F8, E1, E2, E7, or E8 appears in the display.

– The appliance has suffered a fault. Contact the customer service

department.

You may be able to rectify the following faults by checking

the possible causes yourself.

• Appliance does not function:

– Is the appliance switched on?

– Is the plug correctly fitted in the mains socket?

– Is the fuse intact?

• When inserting the mains plug, the refrigeration unit does

not switch on, but a value is shown in the temperature

display.

– Demo mode is activated.

Contact the customer service department.

• Loud running noise:

– Is the appliance set up firmly on the floor?

– Does the appliance cause nearby items of furniture or objects to

vibrate? Please note that noises caused by the refrigerant circuit

cannot be avoided.

• The temperature is not low enough:

– Is the temperature setting correct (see "Setting the temperature")?

– Does the separately installed thermometer show the correct

reading?

– Is the ventilation system working properly?

– Is the appliance set up too close to a heat source?

If none of the above causes

apply and you cannot rec-

tify the fault yourself, contact

the nearest customer ser-

vice department stating the

type designation

, service

number

and appliance

number

as indicated on the

type plate.

The position of the type plate is shown in the section entitled

Description of the appliance.

Cleaning

A failure to follow these instructions may result in the food being

spoilt.

Before cleaning, always disconnect the appliance

from the mains. Pull out the plug or switch o the

fuse.

Surfaces which may come into contact with food

and accessible drain systems must be cleaned at

regular intervals.

If the door is left open for a lengthy period, the

temperature in the appliance's compartments may

rise dramatically.

• Clean the inside, equipment parts and outer walls with lukewarm

water and a little detergent. Do not use chemical solvents or any

cleaning agents containing sand or acid.

• Use a glass cleaner to clean the glass surfaces and a commercially

available stainless-steel cleaning agent for the stainless-steel

surfaces.

CAUTION

Risk of damage to the appliance components and

risk of injury due to hot steam.

Do not use steam cleaning equipment to clean

the appliance.

• Ensure that no cleaning water penetrates into the electrical

components or ventilation grille.

• Dry all parts well with a cloth.

• Do not damage or remove the type plate on the inside of the

appliance. It is very important for servicing purposes.

If the appliance is left empty for a lengthy period, it must be

switched o, defrosted, cleaned and dried and the door is to be

left open to prevent mould formation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr WTes 5972 Vinidor Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr WTes 5972 Vinidor

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info