Bedienungsanleitung Liebherr XCCsd 5250 (Seite 13 von 56) (Englisch)

805290

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

SabbathMode has been deactivated.

CleaningMode

This setting makes it easy to clean the appliance.

This setting is relevant to the fridge section

Fig. 1 (A)

Use:

-Clean the fridge section manually.

What happens with the appliance when this setting is on:

-The display shows CleaningMode permanently.

-The refrigerator compartment is switched off.

-The internal light is on.

-Reminders and warnings are not shown. There is no

acoustic signal.

Activating/deactivating settings

uActivate/deactivate setting (see 6.2 Operating logic) .

wOn: Fridge compartment is switched off. Light stays on.

wOff: preset temperature is restored.

The setting is automatically deactivated after 60 minutes. Then

the appliance continues operation in normal mode.

TubeClean*

This setting cleans the IceMaker pipes.*

Make sure that the following requirements are met:*

qIceMaker cleaning process is ready (see 8.3.7 Cleaning the

IceMaker*) .

Activate setting*

uActivate the setting in the customer menu (see 6.2 Oper-

ating logic) .

wTubeClean is prepared (max. 60 min.): The symbol flashes.

wWater pipes are rinsed: Symbol flashes.

wRinsing process is complete: Function turns off automati-

cally.

Ice cubes*

With this setting, you can choose the ice cube size.*

Choosing the setting*

uMake your settings in the Customer menu (see 6.2 Oper-

ating logic) .

D-Value

Note

Liebherr recommends:

uOperate the appliance with a dry rear panel to avoid visible

condensation and prevent the goods freezing to the panel.

The

D-Value

specifies whether you are operating your fridge

compartment with or without a dry rear panel. The rear panel is

mounted in the appliance on delivery. The default setting for the

D-Value

You can remove the rear panel for cleaning.

(see 8.3.4 Cleaning the dry rear panel) To operate the appli-

ance without a rear panel, you need to set the

D-Value

Choosing the setting

uSet the value in the customer menu. (see 6.2 Operating

logic)

Reminder

Reminders are displayed acoustically by a beep and visually by

a symbol in the display. The signal gets louder until the alert

stops.

Replace the FreshAir active carbon filter

This message appears when the air filter needs replacing.

uReplace the air filter every six months.

uConfirm the message with OK.

wThe service interval resets.

wThe air filter guarantees the air quality in the fridge.

Activate setting

uActivating/deactivating (see 6.2 Operating logic) .

Reset

This function resets all settings to the factory settings. All

settings that you have made thus far will be reset to their orig-

inal values.

Activate the setting

uActivating (see 6.2 Operating logic) .

Turn off appliance

This setting turns off the whole appliance.

Switch off whole appliance

Fig. 11

uTurning off the IceMaker .*

uActivating/deactivating (see 6.2 Operating logic) .

wOff: Display turns black.

6.5 Error messages

Error messages appear in the display. There are two categories

of error message:

Category Meaning

Message Reminder of general procedures. You can carry out

these procedures to eliminate the message.

Warning Appears when there are malfunctions. A signal

sounds in addition to the display. The signal

becomes louder until you acknowledge by tapping

the display. You can eliminate simple defects your-

self. For more serious defects, you must contact

customer service.

Use

* Depending on model and options 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr XCCsd 5250 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr XCCsd 5250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info