Bedienungsanleitung Liebherr XRFsf 5220 (Seite 43 von 48) (Englisch)

805296

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

8 Maintenance

8.1 FreshAir carbon filter

The FreshAir carbon filter is located in the compartment

above the fan.

It guarantees the best air quality.

qChange the carbon filter every 6 months.

When the reminder is set, a message on the display

prompts you to change it.

qYou can dispose of the carbon filter with the regular

household waste.

Note

FreshAir activated charcoal filters can be purchased from

the Liebherr-Hausgeräte store at home.liebherr.com/

shop/de/deu/zubehor.html.

8.1.1 Removing the FreshAir carbon filter

Fig. 42

uPull out the compartment Fig. 42 (1).

uRemove the carbon filter Fig. 42 (2).

8.1.2 Inserting the FreshAir carbon filter

Fig. 43

uInsert the carbon filter as shown in the diagram

Fig. 43 (1).

wThe carbon filter clicks into place.

If the carbon filter is pointing downwards:

uPush the compartment in Fig. 43 (2).

wThe carbon filter is now ready for use.

8.2 Disassembling / assembling pull-

out systems

8.2.1 Notes on disassembly

You can disassemble some of the pull-out systems for

cleaning. Your appliance can contain a variety of pull-out

systems.

The following pull-out systems can be disassembled or

cannot be disassembled:

Pull-out system can be disassembled /

cannot be disassembled

Drawer on glide

rails

cannot be disassembled

Pull-out board with

bottle basket*

can be disassembled (see 8.2.2 Pull-

out board with bottle basket*) *

8.2.2 Pull-out board with bottle basket*

Disassembling pull-out system

Make sure that the following requirements are fulfilled:

qBottle basket has been removed. (see 7.8 Pull-out board

with bottle basket*)

qGlass shelf has been removed. (see 7.9 Glass shelves)

Fig. 44 Glass shelf with rails

uPush up front click-in hooks. Fig. 44 (1)

uSlide pull-out rails to the side Fig. 44 (2) and backwards

Fig. 44 (3).

Installing pull-out system

Fig. 45 Glass shelf with rails

uHook in rail at the back. Fig. 45 (1)

uHook in rail at the front. Fig. 45 (2)

8.3 Defrosting the appliance

WARNING

Appliance incorrectly defrosted!

Injuries and damage.

uDo not use mechanical devices or other means to accel‐

erate the defrosting process, other than those recom‐

mended by the manufacturer.

uDo not use any electrical heating or steam cleaning

equipment, naked flames or defrosting sprays.

uDo not remove ice with sharp objects.

Defrosting is performed automatically. The water from the

thawing process runs out via the drain opening and is

evaporated.

Water droplets or a thin layer of frost or ice can form on the

rear wall; this is a completely normal part of the appliance’s

function. You do not have to remove them.

A frost or ice layer may form briefly due to the energy-opti‐

mized control of the appliance.

uClean the drain opening regularly (see 8.4 Cleaning the

appliance) .

Maintenance

* Depending on model and options 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr XRFsf 5220 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr XRFsf 5220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info