9
On the 90C: The pedals on the Lifecycle exercise bike have footstraps with slits on both the inside
and the outside of each strap. The straps are held in place by two knobs that extend sideways
from either side of each pedal. To tighten or loosen a strap, grasp the outer end, and pull it back,
away from the knob, until the strap slides off. Rest the foot on the pedal, and wrap the strap over
the foot to determine the proper length. Select the appropriate slot on the strap, and pull that slot
down over the knob, until the top of the knob pops through the slot. A click indicates that the
strap is locked into place.
STARTING UP THE BIKE CONSOLE
93C model: When a user begins pedaling on the Lifecycle exercise bike, the unit’s Auto-Start fea-
ture powers up the console, causing the console display to light up and the MESSAGE CENTER to
flash a prompt: “SELECT WORKOUT USING ARROW KEYS OR PRESS QUICK START.” If the
user does not make a selection in 20 seconds, the console automatically starts a MANUAL work-
out. For information on setting up a workout, see Section 4.2, titled Using the Workouts. If the user
stops pedaling for more than 15 seconds, the console shuts down.
Alternately, the user may begin pedaling at a predetermined rate and press the START key to
power up the console.
90C model: When a user begins pedaling at a predefined rate on the Lifecycle exercise bike
and presses the START key, the console display lights up, and the MESSAGE CENTER flashes
a prompt: “SELECT WORKOUT USING ARROW KEYS OR PRESS QUICK START.” If the user
does not make a selection in 20 seconds, the console automatically starts a MANUAL workout.
For information on setting up a workout, see Section 4.2, titled Using the Workouts. If the user
stops pedaling, the console shuts down.
FITNESS AND ENTERTAINMENT NETWORKING
This feature is an option on the on the 93C model. Two interchangeable network ports allow the
Lifecycle exercise bike to be connected to a fitness entertainment system and/or a fitness net-
work, such as the FitLinxx
®
interactive fitness network.
• Fitness network: The network connection enables the bike console to upload user
workout statistics to a fitness network database or to download remotely stored informa-
tion, such a pre-set workout program. See Section 4.2, titled Using the Workouts, for
information on logging onto a network. To order the kit, call Life Fitness Customer Support
Services. See Section 6.4, titled How to Obtain Product Service.
• Entertainment: The network connection enables the bike console to power a third-party
receiver for use with a service such as the Cardio Theater
®
entertainment system or
BroadcastVision
TM
entertainment system. It is necessary to purchase and install a retrofit
kit to enable this feature. To order the kit, call Life Fitness Customer Support Services. See
Section 6.4, titled How to Obtain Product Service.
Any use of these ports for other than their intended purpose could void the product warranty.
