9
STEP 6:
• Use a hammer to tap one 5/16 X 2” ROLL PIN (47)
thru the LEFT PRESS HANDLE (7) until it is flush
with the other side of the HANDLE as shown in
FIGURE 6.
• Repeat STEP 6 for the RIGHT PRESS HANDLE
(6).
S
TEP 7:
• Place the LEFT PRESS HANDLE (7)
onto the PRESS ARM (8). Place the
PRESS ARM SPACER (65) as shown
over the 5/16 x 2” ROLL PIN (47),
make sure that the 5/16 X 2” ROLL PIN
(47) passes into the slot located in the
plate of the PRESS ARM (8).
• Once in place, secure and tighten the
LEFT PRESS HANDLE (7) to the
PRESS ARM (8) using one 3/8” WASH-
ER (36) and one 3/8” LOCK NUT (34).
• IMPORTANT! Do not overtighten:
PRESS ARM should rotate freely.
• Repeat STEP 7 for the RIGHT PRESS
HANDLE (6).
FIGURE 7
Note: Place the PRESS ARM (8) upside down on
the floor as shown to complete this step.
HANDLES (7) MUST BE PLACED
TOWARDS INSIDE OF THE PRESS ARM.
FLUSH SIDE
