Bedienungsanleitung Life Fitness T5 GO CONSOLE (Seite 30 von 33) (Englisch)

655190

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

6.2 TROUBLESHOOTING

PROBLEM CAUSE / SOLUTION

No power.

Check to see that the power cord is fully plugged into the back of the product and into the

wall. Make sure the power cord is fully seated into the back of the product.

You may be in “Energy Saver Mode”. Press the “Energy Saver” button to see if the console

turns on.

Verify that all customer assembly connections are working properly. Unplug and re-plug

each connection to verify. Look to see if any cables were pinched during assembly.

Wireless heart rate is

not working.

Potential reasons for the wireless heart rate not to work properly include:

 The wireless heart rate is turned OFF in the Settings Menu. Enter the Settings

Menu and verify that WIRELESS HR is turned ON.

 There is poor contact between the telemetry heart rate strap and the skin.

 There is electrical interference from electrical appliances with the telemetry heart

rate strap from ﬂ uorescent lights, kitchen appliances, etc. Move the product to a

different location or move electrical appliances away from the product.

 The battery in the Heart Rate Telemetry Strap needs to be replaced. The battery is

a CR2032 (3V).

Heart rate reading is initial-

ly detected and functioning

normally but then is lost.

Use of personal electronic devices, such as cell phones and portable mp3 players, cause

external noise interference.

Equipment is in close proximity to other sources of noise such as audio / video equipment,

fans, two way radios, and high voltage/high current power line.

Remove the source of noise or reposition the exercise equipment.

Contact heart rate sensors

are not reading my heart

rate correctly.

Be sure to grasp the sensors ﬁ rmly and keep hands still. If heart rate seems substantially

higher or lower than expected, remove hands from sensors until heart rate disappears.

Tips for contact heart rate:

 Dry hands to prevent slipping on the sensors.

 Apply hands to all four sensors (two in each hand).

 Grasp sensors ﬁ rmly.

 Apply constant pressure to the sensors.

 May need to wait longer for heart rate to display.

Note: The heart rate hand pulse sensors provide an approximate heart rate value.

The sensors are not medical devices and should not be used in any type of medical ap-

plication.

Stuck key error is

displayed.

One of the keys is stuck under the plastic console shell. Check all keys and unstick the

one that is stuck. If that does not work, unplug the unit and plug it back in.

Console turns off when not

in use.

The unit will go into Energy Saver mode after ﬁ ve minutes of inactivity. Press the ENERGY

SAVER button to turn the console on.

Console display looks

strange or has an error

message and is not func-

tioning.

Unplug or turn the unit OFF to reset the console and then turn ON or plug the console

back in. Repeat multiple times if the console error message still appears. If the problem

persists, contact Customer Support Services.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Life Fitness T5 GO CONSOLE Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Life Fitness T5 GO CONSOLE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info