Bedienungsanleitung Life Fitness X5 (Seite 21 von 28) (Englisch)

655180

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

7. THE WORKOUTS(CONTINUED)

7.1.12 HILL

The Life Fitness patented Hill workout offers the ideal configuration for

interval training: periods of intense aerobic activity separated by regular

intervals of lower-intensity exercise. The computerized interval training

workout has been scientifically demonstrated to yield greater

cardiorespiratory improvement than steady-pace training. Not only does the

Hill workout offer the challenge of alternating periods of high and low

intensity, but the levels of intensity become progressively more difficult during

the course of the workout. The longer the Hill workout, the more amount of

time spent on top of a hill and at the bottom of a valley.

PHASES

Each Hill workout session comprises the following phases:

(1) Warm-up, (2) Plateau, (3) Interval Training, and (4) Cool-down.

NOTE: Check the pulse at the Heart Rate (HR) Check Points (following the Plateau and Interval Training phases) to ensure that the

heart rate has entered and remained within the target heart rate zone.

Warm-up: Gradually brings up the heart rate, increasing respiration and blood flow to working muscles.

Plateau: Increases heart rate so that it is within target zone. Check the heart rate to ensure that it has entered the target zone.

Interval Training: A series of hills and valleys. During this portion of the workout, the user is confronted with a series of successively

steeper hills, each separated from the next by a valley or recovery period. Check the heart rate to ensure that it has remained within

the target zone.

Cool-down: The cool-down allows the body to begin removing accumulated by-products of exercise, such as lactic acid, which build

up in muscles during a workout and contribute to muscle soreness.

Effort and recovery periods are simulated on the display console by columns of red lights in the workout Profile window. Each column

represents one interval and 20 intervals comprise the workout. The columns move from right to left during the workout. The higher the

column, the higher the resistance. Consequently, the effort must be increased to continue training.

1 to 9 minutes: Because workouts with durations of less than 10 minutes are insufficient for the Hill workout to complete all four

phases adequately, the workout condenses at various stages in order to meet the chosen workout time.

10 to 19 minutes: The interval durations are initially set at 30 seconds for a 10-minute workout. For every additional minute of

workout duration, the Hill workout lengthens each interval by three seconds. Thus, a 15-minute Hill workout will feature 20 intervals of

45 seconds each.

20 to 99 minutes: All intervals last 60 seconds. As minutes are added, additional hills and valleys are presented beyond the initial

four of the interval training phase. The additional hills and valleys will follow the form of the first four, dropping back down to the level

of the very first hill encountered and progressing in height every two minutes until the highest hill is reached again. This process

repeats until the workout duration is met.

7.1.13 C

ROSS-TRAIN AEROBIC (X5IONLY)

This workout makes the most of the Life Fitness Cross-Trainers total body workout capabilities by leading the user through a varied

workout that exercises all the major muscle groups.

For an upper body workout that works all the muscles in the arms, the console directs the user to push and pull the handlebar arms at

various times. The console will also vary the workout between total body and lower-body-only workouts, during which the user rests

his or her hands on the stationary handlebar.

To maximize a lower-body workout, forward and reverse motions and speeds are alternated, working all the muscles in the legs

during a single exercise session.

This Cross-Trainer workout uses one, selectable resistance level. However, it can be made into a variable resistance workout by

selecting the Hill, Manual or Random program first, then, pressing the Aerobics Mode key on the console.

7.1.14 CROSS-TRAIN REVERSE (ALL MODELS)

To vary the Cross-Trainer exercise and maximize the lower-body workout, the Cross-Train Reverse workout directs the user to use a

forward motion for five minutes followed by backward motion for two minutes. By making the most of the Life Fitness Cross-Trainers

forward and reverse feature, this program provides an effective workout for the thighs,

calves, hips and buttocks.

NOTE: The Cross-Train Reverse workout is a single resistance program. However, it can be made into a variable resistance

workout by first selecting the Hill, Manual or Random program, then, pressing the Reverse Mode key on the console after

starting the workout.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Life Fitness X5 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Life Fitness X5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info