549148
12
Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
11
5. Front Handlebar Post, Front Handlebar Post Cover, and Computer Installation
Remove one Ø8xØ20 Big Curve Washer (28), four Ø8xØ16 Washers (49), and five M8x15
Bolts (23) from the tube of the Front Main Frame (27). Remove bolts with the 5mm Allen
Wrench provided.
Slide the Front Handlebar Post Cover (20) up to the Front Handlebar Post (26).
Connect the Extension Hand Pulse Sensor Wires B (22B) and Sensor Wire (40B) from the
Front Main Frame (27) to the Extension Hand Pulse Sensor Wires A (22A) and Extension
Sensor Wire (40A) from the Front Handlebar Post (26).
Turn the Tension Control Knob (31) in a clockwise direction to the highest level. Put the
cable end of resistance cable of Tension Control Knob (31) into the cable lock of Tension
Cable (56), see Figure A.
Pull the resistance cable of Tension Control Knob (31) up and force it into the slot of metal
bracket of Tension Cable (56), see Figure B.
Insert the metal fitting on the resistance cable of Tension Control Knob (31) into the hole at
the end of the slot in the metal bracket of Tension Cable (56), see Figure C.
Connect the resistance cable of Tension Control Knob (31) to Tension Cable (56) complete,
see Figure D.
Insert the Front Handlebar Post (26) onto the tube of the Front Main Frame (27) and secure
with one Ø8xØ20 Big Curve Washer (28), four Ø8xØ16 Washers (49), and five M8x15 Bolts
(23) that were removed. Tighten bolts with the 5mm Allen Wrench provided.
Slide the Front Handlebar Post Cover (20) down to the Front Main Frame (27).
Remove four M5x10 Bolts (30) from the back of the Computer (29). Remove bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Connect the Extension Hand Pulse Sensor Wires A (22A) and Extension Sensor Wire (40A)
to the wires that come from the Computer (29). Tuck wires into the Front Handlebar Post
(26).
Multi Hex Tool with Phillips Screwdriver
Tool:
Allen Wrench 5mm
A
B
C
D
3
31
31
40A
40A
40B
40B
28
28
56
56
56
56
56
31
22B
22B
26
26
29
29
31
31
20
20
49
49
23
23
27
27
23
23
22A
22A
40A
40A
22A
22A
30
30
31
31
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LifeGear Accord Magnetic Recumbent Bike 26470 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info