552432
11
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
10
2. Seat Post, Seat Cushion, and Seat Sliding Tube Installation
Slide the Seat Post Cover (58) onto the tube of the Main Frame (41). Insert the Seat Post
(11) into the bushing on the tube of the Main Frame (41) and then attach the Round Knob
(63) onto the tube of the Main Frame (41) by turning it in a clockwise direction with the Multi
Hex Tool provided to lock the Seat Post (11) in the suitable position.
Adjusting the seat height:
Turn the Round Knob (63) in a counterclockwise direction until it can be pulled out. Pull out
the Round Knob (63) and then slide the Seat Post (11) up or down direction to the suitable
position. Lock the Seat Post (11) in place by releasing the Round Knob (63) and sliding the
Seat Post (11) up or down slightly until the Round Knob (63) "pops" down into the locked
position. For added safety, tighten the Round Knob (63) in a clockwise direction.
NOTE: When adjusting the height of seat post, the maximum insert depth mark line
cannot higher than the edge of seat post cover.
Remove three Ø16xØ8x1.5 Washers (16) and M8 Nylon Nut (42) from underside of the Seat
Cushion (13). Guide bolts on underside of the Seat Cushion (13) through holes on top of
the Seat Sliding Tube (12), attach with three removed Ø16xØ8x1.5 Washers (16) and M8
Nylon Nut (42) and tighten. Remove one Ø16xØ8x1.5 Washer (16) and Seat Adjustment
Knob (14) from underside of the Seat Sliding Tube (12). Guide bolt on underside of the
Seat Sliding Tube (12) through hole on top of the Seat Post (11), attach with one removed
Ø16xØ8x1.5 Washer (16) and Seat Adjustment Knob (14) and tighten.
Adjusting the seat forward or back:
Turn the Seat Adjustment Knob (14) to loosen the Seat Sliding Tube (12). Slide the Seat
Sliding Tube (12) forward or back to desired position and turn Seat Adjustment Knob (14) to
tighten.
NOTE: Continue to turn seat adjustment knob until seat sliding tube is secure before
exercising.
Tool:
Multi Hex Tool with Phillips
Screwdriver S13, S14, S15
11
58
63
10
31
14
16
12
13
16
42
41
18
Multi Hex Tool
S10, S13, S17, S19
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LifeGear Advanced - Magnetic Upright Bike 20390 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info