Bedienungsanleitung LifeGear Dynasty Elliptical Cross Trainer

549144

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

TRAINING IN PROGRAM MODE:

Press the UP or DOWN button to select the PROGRAM mode and then press the MODE

button for confirmation. There are 12 pre-set programs that offer you a variety of workout

options. To select a program, use the UP or DOWN button to select one of the pre-set

programs. Press the MODE button for confirmation and the TIME display will flash. At

this point you can press the START/STOP button to start your workout or you can set a

“TIME goal” as described above.

TRAINING IN USER PROGRAM MODE:

Press the UP or DOWN button to select the USER PROGRAM mode and then press the

MODE button for confirmation. The first interval of user program graphic will flash for

setting the load level. Press the UP or DOWN button to set the load level for the first

interval of user program profile. Press the MODE button to confirm the load level for the

first interval of user program profile. There are 20 intervals for setting the load level.

Repeat above steps to set the load level from the second interval to the twentieth interval.

After setting all the load level and then press and hold the MODE button for over 2 seconds,

the TIME display will flash. At this point you can press the START/STOP button to start

your workout or you can set a “TIME goal” as described in training in manual mode.

TRAINING IN H.R.C. MODE:

Press the UP or DOWN button to select the H.R.C. mode and then press the MODE button

for confirmation. There are 4 H.R.C. (Heart Rate Control) programs that offer you a variety

of workout options. To select a program, use the UP or DOWN button. If user selects

H.R.C. 55 and the target heart rate will display on the split window of PULSE according to

user’s age because user has inputted USER data (sex, age, height, and weight) after the

adapter connected to the electrical wall outlet. Press the MODE button for confirmation.

For instance, if user inputs age (25 years old), the calculations will be as follows:

220 - 25 = 195

195 x 55% (0.55) = 107 (55% of your maximum heart rate)

25 year-old male (THR) Target Heart Rate would be 107

At this point you can press the START/STOP button to start your workout or you can set a

“TIME goal” as described in training in manual mode.

After pressing the START/STOP button to exercise, please grip the hand pulse sensors

during exercise, the computer will adjust the load level according to the heart rate detected.

For example, the load level will increase while the heart rate detected is lower than Target

Heart Rate. Also, the load level will decrease while the heart rate detected is higher than

Target Heart Rate. As a result, the user’s heart rate will be adjusted equal to the Target

Heart Rate.

Use the same procedure to operate H.R.C. 75 or H.R.C. 90 as described above.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LifeGear Dynasty Elliptical Cross Trainer - PC 93805 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info