552422
9
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
8
ASSEMBLY INSTRUCTIONS
1. Install the Front/Rear Stabilizers and Foot
Pedals.
Attach the Front Stabilizer (6) onto the front curve
plate of the Main Frame (1) with two M10 Cap Nuts
(34), M10x57 Bolts (35), and Ø10 Big Curve
Washers (36).
Remove four M8x15 Bolts (24), Ø8 Spring Washers
(61), and Ø8 Curve Washers (37) from the Rear
Stabilizer (4). Then attach the Rear Stabilizer (4)
onto the rear tube of the Main Frame (1) with four
M8x15 Bolts (24), Ø8 Spring Washers (61), and Ø8
Curve Washers (37) that were removed.
Connect the Left Foot Pedal (20) to the left Crank
(19). Thread it into the crank assembly in the counterclockwise direction by the tool
provided.
Connect the Right Foot Pedal (21) to the right Crank (19) by threading it in the clockwise
direction.
NOTE: The Left and Right Foot Pedals (20, 21) and Crank (19) are marked with “L” & “R
(left and right).
2. Install the Seat Cushion and Seat Post.
Remove three M8 Locknuts (42) and Ø8 Washers
(38) from underneath of the Seat Cushion (27).
Then attach the Seat Cushion (27) onto the triangle
plate of Seat Post (25) with three M8 Locknuts (42)
and Ø8 Washers (38) that were removed.
Insert the Seat Post (25) into the Bushing (12) on the
tube of the Main Frame (1) and then attach the Seat
Post Knob (8) onto the tube of the Main Frame (1) by
turning it in a clockwise direction to lock the Seat
Post (25) in the suitable position.
Adjusting the seat post:
Turn the Seat Post Knob (8) in a counterclockwise direction until the Seat Post (25) can be
slid up or down and then slide the Seat Post (25) up or down direction to the suitable position.
Lock the Seat Post (25) in place by tightening the Seat Post Knob (8) in a clockwise
direction.
NOTE: When adjusting the height of seat post, the maximum insert depth mark line
cannot higher than the edge bushing.
4
6
35
20
1
34
36
21
19
61
37
61
24
1
42
25
8
1
27
38
12
2
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LifeGear Streamline - Basic Magnetic Upright Bike 20565 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info