552475
11
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
10
4. Handlebar, Computer, and Foot Pedals Installation
Remove two Ø16xØ8x1.5 Curve Washers (52) and two M8x15 Bolts (NYLOK Blue Patch)
(64) from the Handlebar Post (2). Remove bolts with the S5 Allen Wrench provided.
Insert the Hand Pulse Sensor Wires (57) into the hole on the Handlebar Post (2) and then
pull them out from the top end of the Handlebar Post (2).
Attach the Handlebar (4) onto the Handlebar Post (2) with two Ø16xØ8x1.5 Curve Washers
(52) and two M8x15 Bolts (NYLOK Blue Patch) (64) that were removed. Tighten bolts with
the S5 Allen Wrench provided.
Remove four M5x10 Bolts (50) from the Computer (48). Remove bolts with the Multi Hex
Tool with Phillips Screwdriver provided.
Connect the Hand Pulse Sensor Wires (57) and Extension Sensor Wire (59) to the wires that
come from the Computer (48). Tuck wires into the Handlebar Post (2). Attach the
Computer (48) onto the top end of the Handlebar Post (2) with four M5x10 Bolts (50) that
were removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
Foot Pedals Installation
The Cranks, Pedal Shafts, and Foot Pedals are marked “R” for Right and “L” for Left.
Insert the pedal shaft of Left Foot Pedal (9) into threaded hole in the left Crank (13). Turn
the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the
threads.
Tighten the pedal shaft of Left Foot Pedal (9) with the Multi Hex Tool with Phillips
Screwdriver provided. Insert pedal shaft of Right Foot Pedal (10) into threaded hole in right
Crank (13). Turn the pedal shaft by hand in the clockwise direction until snug. Tighten
pedal shaft of Right Foot Pedal (10) with the Multi Hex Tool with Phillips Screwdriver
provided.
Multi Hex Tool with Phillips Screwdriver
S13, S14, S15
Allen Wrench S5
Tool:
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LifeGear Swany - Magnetic upright Bike 20460A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info