16
99.50 km. Once you pre-set target distance and then start to exercise, distance starts
counting down from pre-set target distance to 0.00. When the pre-set target distance
counts down to 0.00, distance will start to count up immediately and the computer will begin
beeping to remind you.
KJOULE (CALORIES): Displays the total accumulated calories burned during workout.
When you start to exercise, calories start counting up from 0 to 9999 KJOULE. You may
also pre-set target calories in STOP mode before training. To set CALORIES press the
MODE button until you see the KJOULE begin blinking. Press the SET button to change
the calories, each time you press the SET button CALORIES change by 10 KJOULE.
Press the RESET button to clear the target calories to zero. The pre-set target calories
range is from 0 to 9990 KJOULE. Once you pre-set target calories and then start to
exercise, calories start counting down from pre-set target calories to 0. When the pre-set
target calories count down to 0, calories will start to count up immediately and the computer
will begin beeping to remind you. (This data is a rough guide for comparison of different
exercise sessions and should not be used in medical treatment).
PULSE: Displays your current heart rate figures after you grip the handlebar sensors with
both your hands during exercise. To ensure the pulse readout is more precise, please
always hold on to the handlebar grip sensors with two hands instead of just with one hand
only when you try to test your heart rate figures. You may also pre-set target heart rate in
STOP mode before training. To set PULSE press the MODE button until you see the
PULSE begin blinking. Press the SET button to pre-set target heart rate. Press the
RESET button to clear the target heart rate to zero. The pre-set heart rate range is from 72
to 240 beats per minute. Once you pre-set target heart rate and then start to exercise,
please grip the handlebar sensors with both your hands during exercise. If the heart rate
detected greater than the target heart rate, the computer will begin beeping to remind you.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover at the rear of computer.
2. Place two "SIZE-AA" batteries into the battery housing.
3. Insure batteries are correctly positioned and battery springs are in proper contact with
batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial legible, remove batteries and wait 15 seconds
before reinstalling.
