460776
10
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
7
SETTING UP YOUR METER
CAUTION: Matching the code on the meter and the code on the test strip vial is essential to obtaining accurate
results. Each time you test, check to make sure the code numbers match.
Insert a test strip to turn on the meter
Remove a test strip from its vial. With clean, dry hands, you may touch the test strip anywhere on
its surface. Do Not bend, cut or modify the test strips in any way. Use each test strip immediately
after removing it from the vial. Insert the test strip into the test port as shown, with the three
contact bars facing you. Push the test strip in as far as it will go.
After the black start-up screen appears, the meter will display the code from your last
test. If a ashing “– –” appears instead of a code number, such as when you are rst
using the meter, follow the instructions in step 3 to change to a numerical code.
Match the code on the meter with the code on the test strip vial
If the code on the meter does not match the code on the test strip vial, press
or
to match
the code number on the test strip vial. The new code number will ash on the display for three
seconds, then briey stop ashing, after which the display will advance to the APPLY BLOOD
screen.
If the codes already match, press
to go to the APPLY BLOOD screen. When you do not
make a change after ve seconds, the display will advance to the APPLY BLOOD screen.
The meter is now ready to perform a blood glucose test.
NOTE:
• If the APPLY BLOOD screen appears before you are sure the codes match, remove the test strip, and re-start from step 1.
• If you change APPLY BLOOD to APPLY CONTROL by mistake, press
to change it back to APPLY BLOOD.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LifeScan One Touch Ultra 2 Bloedglucosesysteem wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von LifeScan One Touch Ultra 2 Bloedglucosesysteem

LifeScan One Touch Ultra 2 Bloedglucosesysteem Bedienungsanleitung - Holländisch - 30 seiten

LifeScan One Touch Ultra 2 Bloedglucosesysteem Bedienungsanleitung - Spanisch - 30 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info