Bedienungsanleitung Lifespan C3-DT5 (Seite 15 von 21) (Englisch)

669736

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Treadmill Desk Troubleshooting

Problem

Solution

Problem

Solution

Problem

Solution

Problem

Solution

Problem

Solution

Only the weight LED is dimly lit. Pressing the start button

will make the screen ash.

The treadmill desk is in sleep mode. Press and hold the

On/Start button for three seconds to power on the unit.

The console is erratic or not lighting up.

Check to make sure the treadmill desk is properly plugged

in. Turn the power switch o and back on again and make

sure the safety key is in place. Make sure the connectors

located in the front of the treadmill and under the desktop

are fully plugged in. If the problem persists contact

LifeSpan customer service.

The treadmill motor seems strained or E1 comes up after

several minutes of use.

The silicone lubricant that is applied to the deck and belt

is wearing down and the belt needs to be lubricated with

100% silicone spray (non-aerosol).

The treadmill automatically pauses during a workout.

The treadmill is not picking up the step count. Go into

the Personal Settings section (page 32) to turn the Intelli-

Guard feature o.

The treadmill speed doesn’t feel right (either too fast or

too slow).

Go into the Personal Settings section (page 32) and check

if you are in Metric or English mode. If you are in the

correct mode, contact LifeSpan customer service.

The LifeSpan Treadmill Desk is designed and manufactured to be

reliable and easy to use. However, if you have a problem, these

troubleshooting steps may help you nd the cause.

Problem

Solution

Problem

Solution

Problem

Solution

Problem

Solution

Problem

Solution

“Uart” appears in the display.

Turn the treadmill desk power switch o. Unplug and

re-plug the connections made in step 3C and 3D during

assembly (DT-5) or step 4C and 4D (DT-7). Make sure the

thumb screws are properly tightened. Turn the treadmill

desk power back on and check to see if it functions properly.

“dc-6” appears in the display.

Turn the treadmill desk power switch o. Unplug and

re-plug the connections made in step 3C and 3D during

assembly (DT-5) or step 4C and 4D (DT-7). Make sure the

thumb screws are properly tightened. Turn the treadmill

desk power back on and check to see if it functions properly.

The console isn’t connecting to personal computer via

Bluetooth.

Log into your LifeSpan Fitness Club account. Click on the

Frequently Asked Questions link located at the bottom of

the homepage. If further assistance is needed, please email

coordinator@LifeSpanFitness.com.

The treadmill desk does not go into sleep/energy saving

mode.

In order for the unit to go into sleep/energy saving mode,

press and hold the stop button for three seconds to reset

the console. After ten minutes the console will go into

sleep/energy saving mode.

The desktop surface is not level.

Check to make sure the base feet are on a level surface.

For a DT-5, make sure each extension tube is raised to the

same height number as shown on the extension tube. For

a DT-7, run callibration by pressing and holding the height

adjustment buttons similtaneously for three seconds

Treadmill Desk Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lifespan C3-DT5 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info