Bedienungsanleitung Lifespan TR7000i (Seite 26 von 34) (Englisch)

765151

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Operating Your Treadmill (continued)

HRC – Interval (continued)

7. Set LOW Target Heart Rate – Set your LOW interval training rate using the UP / DOWN arrow keys.

Press ENTER.

8. Press the START button to begin your workout.

Fitness Test:

This test is to evaluate the overall cardiovascular tness of an adult. The formula which takes the user to a

nal evaluation number when the test is done, uses Sex, Age, Weight, Heart Rate, and Time in an equation

to determine the cardiovascular tness for adults.

To use this program:

1. Press the UP / DOWN buttons till top window says FITNESS TEST. Press ENTER

2. Enter your weight using the UP / DOWN buttons. Press ENTER

3. Enter your age using the UP / DOWN buttons. Press ENTER

4. Enter your Sex using the UP / DOWN buttons. 1 = M; 0 = F. Press ENTER

5. Press START. Walk as briskly as possible for 1 mile (1609 meters). Do not jog or run.

6. When you get to within 0.1 miles of the end of the test (160 meters), place your hands on the

contact heart rate pads so that the treadmill can measure your heart rate. (If you are wearing a heart

rate chest strap, you do not need to do this.)

7. When the test is nished, the treadmill will display your tness test score and tness category.

Note: It is a good idea to warm up for a few minutes prior to performing this test.

Warning: Do not over-exert yourself during this test. If you feel faint or dizzy at any time during this test,

stop walking immediately.

IPPT Fitness Test: (TR7000i Only):

Some defense forces use a 2.4-kilometer running test called an IPPT Test. The TR7000i can run this test.

This test is to evaluate the overall tness of an adult. User age weight and time are used in an equation to

determine the tness test result. The formula gives the user a nal evaluation number when the test is done.

The test running distance is 2.4Km.

To start this program:

1. Press the UP or DOWN buttons till top window says IPPT TEST. Press ENTER.

2. Enter your weight using the UP / DOWN buttons. Press ENTER.

3. Enter your age using the UP / DOWN buttons. Press ENTER.

4. Press START and start IPPT testing.

5. When the test is nished, the treadmill will display your tness test score. The score is from 0 to 50.

Note: It is a good idea to warm up for few minutes prior to performing this test.

Warning: Do not over-exert yourself during this test. If you feel faint or dizzy at any time during this test,

stop walking immediately.

Innovative Features

Intelli-GuardTM (TR7000i only): This treadmill is equipped with the Intelli-Guard safety feature. This

feature senses when you stop walking on the treadmill and for safety purposes it automatically pauses the

treadmill to avoid accidental falls and resulting injury. The Intelli-Guard feature is triggered when the treadmill

senses that you are no longer walking or running on the treadmill.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lifespan TR7000i Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info