Bedienungsanleitung Liftmaster 2000SDR (Seite 29 von 36) (Englisch)

600903

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Children operating or playing with a garage door opener

can injure themselves or others.

The garage door could

close and cause serious injury or death.

Do not allow

children to operate the door control(s) or remote control

transmitter(s).

A moving garage door could injure or kill someone under

it.

Activate the opener only when you can see the door

clearly, it is free of obstructions, and is properly

adjusted.

“Security Plus”

Your garage door opener receiver and remote control

transmitter have been set at the factory to a matching

code. The door will activate when you press the LARGE

remote control push button.

Your "Security Plus" opener will operate with:

• several Security Plus remote controls (with yellow

indicator lights) utilizing up to 8 functions. NOTE:

Open/Close/Stop operation counts as 1 function.

• one Keyless Entry System (with Security Plus logo)

Follow the instructions below to program your opener to

match any additional remotes you may purchase. See

Accessories on page 34.

To Add a Remote Control

1. Press and hold the selected remote control push button.

See Figure 1.

2. Press and release the "Smart" (learn) button on the

right side panel of the opener. See Figure 2. The

indicator light on the panel will begin to blink and the

opener lights will flash once.

3. Release the remote push button.

Now the opener will operate when the remote control

push button is pressed. Test by pressing the remote button

to see that the door goes up and down.

Adding a remote can also be done from the door

control, as follows:

1. With the door closed, press and hold a remote push

button.

2. Press and hold the Light button on the door control.

3. Press and hold the door control push bar.

4. After the opener lights flash, release all buttons.

Test by pressing the remote push button.

To Erase All Remote Control Codes

Press and hold the "Smart" button on the opener panel

until the indicator light turns off (about 6 seconds). All

transmitter codes are now erased. Then follow the steps

above to re-program each remote control.

To Control the Opener Lights

With Security Plus transmitters, a remote push button can

be programmed to operate the opener lights without

opening the door.

1. With the door closed, press and hold the remote button

that you want to control the light.

2. Press and hold the Light button on the door control.

3. Press and hold the Lock button on the door control.

4. After the opener lights flash, release all buttons.

Test by pressing the remote push button. The opener

lights should turn on or off but the door should not move.

Select a 

push button

Yellow 

Battery Indicator

Light

Sélectionner un 

bouton-poussoir

Témoin lumineux 

jaune de

pile

Figure 1

WARNING

CAUTION

WARNING

Receiver & Remote Control Programming

NOTICE: To comply with FCC rules, adjustment or modification of this

receiver and/or transmitter are prohibited, except for changing the code

setting or replacing the transmitter battery. THERE ARE NO OTHER

USER SERVICEABLE PARTS.

Security Plus

Garage Door Opener

"Smart" (learn) 

Button

Indicator

Light

321

Code programming instructions are

also located on the opener panel.

Open/Close/Stop Operation

Your Security Plus remote control can be programmed to

operate one door using all 3 buttons: the large button will

only open the door, the middle button will only close the

door, and the third button will stop the door’s movement.

You may set up this feature as follows:

1. With the door closed, press and

hold the large remote push button.

2. Press and hold the Lock button

on the door control.

3. Press and hold the door control push bar.

When the opener lights flash, release all buttons. Test by

pressing the large (Open) button on the remote. The door

should open. Press it again while the door is open and

nothing should happen. Press the middle (Close) button

and the door should close. Press the third (Stop) button

while the door is moving and it should stop immediately.

Model 67LM Security Plus Keyless Entry

Follow instructions on page 34 (Accessories).

Open

Stop

Ouverture

Fermeture

Arrêt

Security Plus Remote Control

Figure 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liftmaster 2000SDR Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info