2
Once you have successfully created your LiftMaster
®
MyQ
®
account, you must add the
LiftMaster
®
Internet Gateway to the account. It is easy to do from a computer; this can
also be done from an internet enabled smartphone or tablet. See section 3 for
downloading the MyQ
®
app and sections 5 and 6 for using the app.
• To add the LiftMaster
®
Internet Gateway to your account, the GREEN LED on the
Internet Gateway must be on continuously. If the GREEN LED is off, see Section 1,
Connect & Create. The LiftMaster
®
Internet Gateway must have an internet
connection for the website or phone to find it.
• In the www.myliftmaster.com website, add the LiftMaster
®
Internet Gateway.
Click on “Manage Places” to add the Internet Gateway. If this is the first LiftMaster
®
Internet Gateway connected to the account, the screen will already be at the step
of “Register Gateway”. You will need the SERIAL NUMBER from the bottom label
of the Internet Gateway. The serial number is a series of ten characters,
0 – 9 or a – f. Be sure to use the correct characters (e.g., a zero “0” instead of an
“O”) and keep the character spacing correct (XXXX-XXX-XXX). If this is the
second LiftMaster
®
Internet Gateway to be added, just click on
“Manage Places>Add New Place”. For instructions on how to complete this step
with the MyQ
®
app, see sections 5 and 6.
• Name the LiftMaster
®
Internet Gateway (e.g., “123 Main Street” or “Home Sweet
Home”). Click “Save and Close” to complete this step.
• You can add MyQ
®
devices like the garage door opener, gate operator, lights, or
other accessories from the “Manage Places” page, or you can download the MyQ
®
app and add any MyQ
®
device from a smartphone or tablet. To add the garage door
opener or other devices, click on “Manage Places>Add New Device” and follow
the steps.
Once you click ADD you have 3 minutes to go to the garage door opener
or device and press it’s learn button. To add a gate operator ensure that the gate is
closed. Give the operator an OPEN command. Within 30 seconds, when the gate is
at the open limit press and release the reset button 3 times (on primary gate). The
LiftMaster
®
Internet Gateway will pair to the operator.
Once a device is programmed, it will appear on the screen. You can then name
the device (e.g., left garage door, table lamp, etc.).
REGISTER LIFTMASTER
®
INTERNET
GATEWAY & ADD DEVICES
2
