Bedienungsanleitung Liftmaster 8550 Elite (Seite 29 von 41) (Englisch)

600892

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

Door Control

Using the Door Control

SYNCHRONIZETHEDOORCONTROL

To synchronize the door control to the garage door opener, pressthe push bar until the garage door

opener activates(it may take up to 3 presses).Testthe door control by pressing the push bar,each

press ofthe push bar will activate the garage door opener.

Push Bar

LIGHT

button

Scre

Motion

Sensor

Naviga

tion

Buttons

PUSH BAR

Press the push bar to open or close the door.

NAVIGATION BUTTONS

Use the navigation buttons to make selections and program features.

LIGHTBUTTON

Press the LIGHTbutton to turn the garage door opener lights on or off.When the lights are turned on

they will stay on until the LIGHT button ispressed again, or until the garage door opener isactivated.

Once the garage door opener isactivated the lights will turn offafter the specified period of time (the

factory setting is 4-1/2 minutes). The LIGHT button will not control the lights when the door is in motion.

SCREEN

The screen will display the time and temperature until the menu button is pressed, and then itwill display

the menu options. Ifthere is a problem with the garage door opener the screen will display the Diagnostic

Code. Refer to the Troubleshooting section.

The following features are accessible through the screenusingthe navigation buttons:

LEARN A DEVICE

Any compatible remote controls, wireless keyless entry, or MyQ

accessoriescan be programmed to the

garage door opener by accessing the menu and using the navigation buttons.

LOCK

The LOCK feature is designed to preventactivation of the garage door opener from remote controls

while still allowing activation from the door control and keyless entry.This feature is useful for added

peace ofmind when the home is empty (i.e. vacation).

TIMER-TO-CLOSE (TTC)

DO NOT enable TTC if operating a one-piece door. TTC isto be used ONLY with sectional doors.

Factory defaultissetto off.TTC can be setto automatically close your garage door from the fully open

position after a specified period oftime (1, 5, 10 minute intervalsor a custom setting up to 99 minutes).

The garage door opener will Beep and the lights will Flash before closing the door. The screen on the

door control can display the statusof the TTC.TTC WILL NOT work ifthe garage door opener is

operating by battery power or if the safetyreversing sensors are misaligned.This feature is NOT

intended to be the primarymethod of closing the door. A keyless entry should be installed in the event

of an accidental lock out when usingthis feature.

NOTE: Before enabling the TTC for the first time, or if you experience a power outage, cycle the garage

door opener open and closed to allow the TTC to set.

AUTOMATICLIGHT

Motion Sensor

Factory defaultissetto on. Thisfeature automatically turns on the garage door opener lights when

motion is sensed. The lightswill come on for the setperiod oftime,then shutoff. Ifusing the garage door

opener light asa work light disable the motion sensor,otherwise the light will turn offautomaticallyif you

are beyond the range of the sensor.

Light Feature

The lights will turn on when someone enters through the open garage door and the safetyreversing

sensor infrared beam is broken.

MAINTENANCE ALERT(MAS)

This feature assists the homeowner in ensuring the garage door opener system staysin good working

condition. When the garage door opener needs to be serviced (approximately 4500 garage door

opener cycles) the command (yellow) and service (red) LEDs will begin to alternately flash backand

forth. The factory setting for the MAS feature is off and can be activated at time of installation. Contact your

installing dealer for service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liftmaster 8550 Elite Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info