Bedienungsanleitung Line 6 Firehawk FX (Seite 6 von 16) (Englisch)

693634

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

5. FX Footswitches - Footswitches (FS1–FS5) toggle the FX Blocks

On or O, just like a board full of analog pedals. Each footswitch can

be assigned to a dierent FX Block per Preset, as indicated by the

colored LED surrounding each footswitch. The LED colors indicate:

Yellow (Compressor & Stomp), Blue (Modulation), Purple (Synth),

Green (Delay), Orange (Reverb), White (Looper) and Turquoise (FX

Loop). When pressing one of these footswitches, you’ll also see its

assigned Block description and On/O state momentarily shown

in the LCD display. All FS1–FS5 footswitch assignments can be

created and edited using the Firehawk Remote app. See the

following Firehawk Remote App section for details.

6. Preset & Bank Select Footswitches - Firehawk FX comes loaded

with 128 Presets, comprised of 4 Preset locations (A–D) stored

within each of the Banks (1–32). The LCD display shows the Bank

number, location and title of the currently loaded Preset.

01B Lead

the

Way

LCD display showing Bank, Preset location and title

Each Preset stores all of the Amp and FX parameter settings that

dene the characteristics of the tone, Footswitch & Controller

assignments and FX Loop settings. Use the Bank and Preset Select

footswitches to load and save Presets on Firehawk FX.

NOTE: An unlimited number of Presets can be downloaded, created,

edited, saved and rearranged on your device using the mobile app!

See more details in the following Firehawk Remote App section.

To Load a Preset: Press one of the four Preset Select footswitches

(A–D) to load the Preset within the current Bank. The red LED around

the footswitch indicates your current selection.

To Load a Preset that Resides in a Dierent Bank: Select the

Bank, then choose the Preset Select footswitch. Use the Bank Up 

and Bank Down  footswitches to navigate through Banks. Once

you’ve reached the desired Bank (as indicated in the ashing LCD

Display) press one of the Preset Select footswitches (A–D) to load

the desired Preset within the Bank. The Bank select functionality will

time out after 5 seconds if no footswitch is selected.

Preset Status Indicator: Whenever you change an Amp or FX

setting from its original value, a dot appears between the Preset's

location number and title within the LCD Display indicating that the

Preset is now in an “unsaved” state. You’ll want to Save to retain

your changes to the Preset.

05C

Tone 4 Days

A "dot" indicates an "unsaved" Preset state

To Save a Preset: Press and hold the lit footswitch that indicates

your current selection to enter Save Mode. An arrow character

appears at the left of the LCD Display and the entire display ashes

to indicate you are in Save Mode. To exit Save Mode without making

any changes, wait 5 seconds without touching any controls and the

process will time out and exit automatically.

05CTone 4 Days Days

A ashing display and an "arrow" at the left indicates Save Mode

To Save the Edited Preset to the Preset’s Existing Location:

Simply press and hold the same Preset Select footswitch again.

Once the display stops ashing, your edited settings are saved,

overwriting the former Preset in the location.

To Save to a Dierent Bank and Preset Location: While in Save

Mode, navigate to the desired Bank and Preset location by tapping

the Bank Up/Bank Down footswitch, and then tapping the Preset

Select footswitch for your preferred Preset location. The location

number and title of the Preset that currently resides in this location is

shown in the ashing LCD Display. Press and hold the Preset Select

footswitch assigned to this location to replace the location’s current

Preset with your edited Preset. The LCD will stop ashing and the

title of your new, saved Preset will be displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Line 6 Firehawk FX Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Line 6 Firehawk FX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info