Bedienungsanleitung Linksys AM200 ADSL Modem (Seite 16 von 50) (Englisch)

602195

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Chapter 4: Configuring the ADSL Modem

The Setup Tab

ADSL Modem

RFC 2516 PPPoE

Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections. If

you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do,

you will have to enable PPPoE.

• User Name and Password. Enter the User Name and Password provided by your ISP.

• Keep Alive: Redial Period. If you select this option, the Modem will periodically check your Internet

connection. If you are disconnected, then the Modem will automatically re-establish your connection. To

use this option, click the Keep Alive radio button. In the Redial Period field, specify how often you want

the Modem to check the Internet connection. The default Redial Period is 3 minutes.

• Connect on Demand: Max Idle Time. You can configure the Modem to disconnect the Internet connection

after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has

been terminated due to inactivity, Connect on Demand enables the Modem to automatically re-establish

your connection as soon as you attempt to access the Internet again. To use this option, click the Connect

on Demand radio button. In the Max Idle Time field, enter the number of minutes you want to have

elapsed before your Internet connection terminates.

RFC 2364 PPPoA

Some DSL-based ISPs use PPPoA (Point-to-Point Protocol over ATM) to establish Internet connections. If you

are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoA. If they do, you

will have to enable PPPoA.