Bedienungsanleitung Linksys BEFW11S4 Wireless-B BroadBand Router (Seite 23 von 68) (Englisch)

602208

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Chapter 5: Configuring the Wireless-B Broadband Router

The Wireless Tab - Wireless Security

Wireless-B Broadband Router

The Wireless Tab - Wireless Security

The Wireless Security settings configure the security of your wireless network. Click the radio button next to

Enable to enable Wireless Security before choosing your options. Click the radio button next to Disable if you

need to disable Wireless Security.

There are four wireless security mode options supported by the Router, WPA, RADIUS, and WEP. These four are

briefly discussed here.

WPA Pre-Shared Key. WPA provides the TKIP encryption method, with dynamic encryption keys. Enter a Pre-

Shared key of 8-32 characters, and enter a Group Key Renewal period, which instructs the Router how often it

should change the encryption keys.

WPA Radius. WPA used in coordination with a RADIUS server. (This should only be used when a RADIUS server is

connected to the Router.) Enter the RADIUS server’s IP Address and port number, along with a key shared

between the Router and the server. Then, enter a Group Key Renewal period, which instructs the Router how

often it should change the encryption keys.

Radius. WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is

connected to the Router.) First, enter the RADIUS server’s IP Address and port number, along with a key shared

between the Router and the server. Then, select a level of WEP encryption, and either generate a WEP key

through the Passphrase or select a WEP key and a enter the WEP key manually.

• WEP Encryption Level. An acronym for Wired Equivalent Privacy, WEP is an encryption method used to protect

your wireless data communications. WEP uses 64-bit or 128-bit keys to provide access control to your

network and encryption security for every data transmission. To decode data transmissions, all devices in a

network must use an identical WEP key. Higher encryption levels offer higher levels of security, but due to the

complexity of the encryption, they may decrease network performance. To enable WEP, select 64 bits (10

hex digits) or 128 bits (26 hex digits). To disable WEP encryption, keep the default setting, No Encryption.

• Passphrase. Instead of manually entering WEP keys, you can enter a passphrase. This passphrase is used to

generate one or more WEP keys. It is case-sensitive and should not be longer than 31 alphanumeric

characters. (This Passphrase function is compatible with Linksys wireless products only and cannot be used

with Windows XP Zero Configuration. If you want to communicate with non-Linksys wireless products or

Windows XP Zero Configuration, make a note of the WEP key generated in the Key 1 field, and enter it

manually in the wireless client.) After you enter the Passphrase, click the Generate button to create WEP

keys.

Figure 5-14: WPA Pre-Shared Key

Figure 5-15: WPA Radius

Figure 5-16: Wireless Tab - Radius

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys BEFW11S4 Wireless-B BroadBand Router Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info