Bedienungsanleitung Linksys E-Series (Seite 40 von 92) (Englisch)

590196

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Setting Up: Advanced

Linksys E-Series

•Although the 2.4 GHz band may be more crowded with wireless traffic

from your neighbors, it’s fine for basic Internet traffic that is not time-

sensitive (such as e-mail).

•Even though you are connected to your own wireless network, you are

still sharing “air time” with nearby networks.

•The 5 GHz band is much less crowded than the 2.4 GHz band, so it’s ideal

for streaming multimedia.

•The 5 GHz band has more available channels, so it is more likely that you

will have your own, interference-free channel for your wireless network.

By default, your dual-band router uses the same network name on both the

2.4 GHz band and the 5 GHz band. If you are connecting to your router with

a computer that has a dual-band wireless network adapter, you might not be

able to determine which band you’re using. The easiest way to segment your

traffic is to rename one of your wireless networks. With a separate, descriptive

name, it will be easy to connect to the right network.

To reconfigure your wireless network:

Wireless > Basic Wireless Settings or Wireless Settings

Log into the browser-based utility (see “How to open the browser-based

utility” on page 25).

Click the Wireless tab, then click the Basic Wireless Settings or Wireless

Settings page.

Click Manual. This enables you to make changes to all of the fields below.

Network Mode—Your choice depends upon the clients that will

connect to your network. If all of your devices are Wireless-N capable,

you can select Wireless-N Only for either or both bands.

On the 5 GHz band, you can select:

•Mixed (default), which accepts connections from 802.11a or

802.11n clients

•Wireless-A Only (802.11a only)

•Wireless-N Only (802.11n only)

•Disabled, which disables the 5.0 GHz band on this router

On the 2.4 GHz band, you can select:

•Mixed

•Wireless-B/G Only

•Wireless-B only

•Wireless-G Only

•Wireless-N Only

•Disabled

Network Name (SSID)—Provide a unique SSID for your 5 GHz

wireless network. The name must not exceed 32 keyboard characters.

In the example above, the 5 GHz wireless network was renamed

BronzeEagle5GHz.

Channel Width—We recommend that you keep the default

(Auto) settings. In Auto mode, the router and the network clients

automatically switch to the 40 MHz mode if:

•Your wireless clients support the 40 MHz mode (sometimes

called Bonded mode) in which two 20 MHz channels are bonded

together for better performance.

•There is no adjacent interference.

With more available channels and less chance of interference on the

5 GHz band, you have the option to force the 40MHz mode.

On the 5GHz band, you can select:

•Auto (20 MHz or 40 Mhz)

•20 MHz Only

•40 MHz Only

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys E-Series Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys E-Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info