Bedienungsanleitung Linksys E-Series (Seite 55 von 92) (Englisch)

590196

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Improving Security

Linksys E-Series

To manually set your router’s wireless security settings:

Wireless > Wireless Settings (E4200)

Wireless > Wireless Security (non-E4200)

Log into the browser-based utility (see “How to open the browser-based

utility” on page 25).

Click the Wireless tab, then click the Wireless Settings page (for E4200

routers) or Basic Wireless Settings page (for non-E4200 routers).

Select your preferred security type from the Security Mode drop-down

list For most home networks, we recommend WPA2/WPA Mixed Mode.

Enter a passphrase (security key) for your wireless network in the

Passphrase field. The most secure type of security key should include a

mix of uppercase and lowercase letters, numbers, and punctuation.

Click Save Settings at the bottom of the screen.

How to set up wireless security using

Wi-Fi Protected Setup

For ALL

Why would I use Wi-Fi Protected Setup? Wi-Fi Protected Setup™ is a feature

of your router that makes it easy to add devices to your wireless network. If you

have network devices, such as wireless printers, that support Wi-Fi Protected

Setup, then you can use Wi-Fi Protected Setup to add the devices.

Wi-Fi Protected Setup activity light

The power indicator light on the back of the router (or on top for the E4200)

indicates the status of Wi-Fi Protected Setup while you are connecting devices.

•When Wi-Fi Protected Setup is connecting a network device, the light

flashes slowly.

•If there is an error, the light flashes quickly for two minutes. Wait until it

stops flashing, then try again.

•When Wi-Fi Protected Setup has finished connecting a device, the light

is continuously lit .

•Wait until the light is continuously lit before starting the next Wi-Fi

Protected Setup session.

Connect network devices using one of the three methods below.

NOTE

Wi-Fi Protected Setup configures one device at a time. Repeat the

instructions for each device that supports Wi-Fi Protected Setup.

Connecting a device using the Wi-Fi Protected Setup

button

Use this method if your device has a Wi-Fi Protected Setup button or prompts

you to press the Wi-Fi Protected Setup button on your router.

To connect a device using the Wi-Fi Protected Setup button:

Wireless > Basic Wireless Settings

Press the Wi-Fi Protected Setup button on the network device you are

connecting to.

Press the Wi-Fi Protected Setup button on the back of the router.

- OR -

Log into the browser-based utility (see “How to open the browser-

based utility” on page 25).

Click the Wireless tab, then, if your router is not an E4200, click the

Basic Wireless Settings page.

Click Wi-Fi Protected Setup.

Click the Wi-Fi Protected Setup button in the router’s Wi-Fi Protected

Setup screen.

After the device has been configured, click OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys E-Series Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys E-Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info