Bedienungsanleitung Linksys E2000 Advanced Wireless-N (Seite 22 von 59) (Englisch)

602223

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

Advanced Wireless-N Router

Linksys E2000 Chapter 3: Advanced Configuration

Route Entries To set up a static route between the Router

and another network, select a number from the drop-

down list. Click Delete This Entry to delete a static route.

Enter Route Name Enter a name for the Route here,

using a maximum of 25 alphanumeric characters.

Destination LAN IP The Destination LAN (Local Area

Network) IP is the address of the remote network or host

to which you want to assign a static route.

Subnet Mask The Subnet Mask determines which

portion of a Destination LAN IP address is the network

portion, and which portion is the host portion.

Gateway This is the IP address of the gateway device that

allows for contact between the Router and the remote

network or host.

Interface This interface tells you whether the Destination

IP Address is on the LAN & Wireless (Ethernet and wireless

networks) or the WAN (Internet). (WAN stands for Wide

Area Network.)

Click Show Routing Table to view the static routes you

have already set up.

Advanced Routing > Routing Table

Routing Table

For each route, the Destination LAN IP address, Subnet

Mask, Gateway, and Interface are displayed. Click

Refresh to update the information. Click Close to exit

this screen.

Click Save Settings to apply your changes, or click Cancel

Changes to clear your changes.

Wireless > Basic Wireless Settings

The basic settings for wireless networking are set on this

screen.

There are two ways to configure the Router’s wireless

network(s), manual and Wi-Fi Protected Setup.

Wi-Fi Protected Setup is a feature that makes it easy to set

up your wireless network. If you have client devices, such

as wireless adapters, that support Wi-Fi Protected Setup,

then you can use Wi-Fi Protected Setup.

Configuration View

To manually configure your wireless

network, select Manual. Proceed to the Manual Setup

section. To use Wi-Fi Protected Setup, select Wi-Fi Protected

Setup. Proceed to Wi-Fi Protected Setup, page 23.

Manual Setup

If you set the Configuration View to Manual, the Basic

Wireless Settings screen displays the following fields.

Wireless > Basic Wireless Settings (Manual Setup)

Wireless Band This is used to select the 2.4 GHz or

5.0GHz band.

Network Mode From this drop-down menu, you can

select the wireless standards running on your network.

• MIxed If you have Wireless-N, Wireless-G, and

Wireless-B devices in your network, keep the default,

Mixed.

• BG-Mixed If you have only Wireless-G and Wireless-B

devices in your network, select BG-Mixed.

• Wireless-N Only If you have only Wireless-N devices,

select Wireless-N Only.

• Wireless-G Only If you have only Wireless-G devices,

select Wireless-G Only.

• Wireless-B Only If you have only Wireless-B devices,

select Wireless-B Only.

• Disabled If you do not have any wireless devices in

your network, select Disabled.

NOTE: If you are not sure which mode to use,

keep the default, Mixed.

Network Name (SSID) The Service Set Identifier (SSID)

is the network name shared by all devices in a wireless

network. It is case-sensitive and must not exceed

32keyboard characters. The default is Ciscoxxxxx (xxxxx

are the last five digits of the Router’s serial number). The

serial number is located on the left side of the product

label, which is on the bottom panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys E2000 Advanced Wireless-N Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys E2000 Advanced Wireless-N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info