Bedienungsanleitung Linksys E2000 Advanced Wireless-N (Seite 42 von 59) (Englisch)

602223

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

Linksys E2000 Appendix D: Regulatory Information

Advanced Wireless-N Router

Appendix D: Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

This product has been tested and complies with the

specifications for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in

a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used according to the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which is found by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment or

devices

• Connect the equipment to an outlet other than the

receiver’s

• Consult a dealer or an experienced radio/TV technician

for assistance

FCC Caution: Any changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

IEEE 802.11b or 802.11g operation of this product in the

USA is firmware-limited to channels 1 through 11.

The device for the band 5150-5250 MHz is only for indoor

usage to reduce the potential for harmful interference to

co-channel mobile satellite systems.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. This

equipment should be installed and operated with

minimum distance 20 cm between the radiator and your

body.

This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

Safety Notices

WARNING: Do not use this product near water,

for example, in a wet basement or near a

swimming pool.

WARNING: Avoid using this product during an

electrical storm. There may be a remote risk of

electric shock from lightning.

WARNING: This product contains lead, known

to the State of California to cause cancer, and

birth defects or other reproductive harm. Wash

hands after handling.

Caution: To reduce the risk of fire, use only No.26 AWG or

larger telecommunication line cord.

Industry Canada Statement

This Class B digital apparatus complies with Canadian

ICES-003 and RSS210.

Operation is subject to the following two conditions:

1. This device may not cause interference and

2. This device must accept any interference, including

interference that may cause undesired operation of

the device.

To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the EIRP

is not more than required for successful communication.

Industry Canada Radiation Exposure

Statement

This equipment complies with IC radiation exposure limits

set forth for an uncontrolled environment. This equipment

should be installed and operated with minimum distance

20 cm between the radiator & your body.

This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

Restrictions in the 5 GHz Band

1. The device for the band 5150-5250 MHz is only

for indoor usage to reduce potential for harmful

interference to co-channel mobile satellite systems.

2. This device has been designed to operate with an

antenna having a maximum gain of 4 dBi and 3.5dBi

at 2.4 GHz and 5 GHz respectively. Antenna having

a higher gain is strictly prohibited per regulations of

Industry Canada. The required antenna impedance is

50 ohms.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys E2000 Advanced Wireless-N Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys E2000 Advanced Wireless-N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info