Bedienungsanleitung Linksys E2500 (Seite 33 von 80) (Englisch)

461757

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Setting Up: Advanced

Linksys E-Series

Upgrade your wireless clients

If you have network adapters that support only legacy wireless network

standards such as 802.11b, you should consider upgrading them with

Wireless-N (802.11n) network adapters. Wireless-B (802.11b) devices can slow

your entire wireless network. For the best performance, all of your wireless

devices should support Wireless-N. You can then select Wireless-N Only as your

Network Mode below.

NOTE

If you select Wireless-N Only, you may need to temporarily change

your network settings to Mixed to provide access to guests without

Wireless-N networking.

Split your traffic

The best way to improve your multimedia wireless performance is to split your

wireless traffic between your router’s two bands (ranges of radio frequencies).

Your router supports the 2.4 GHz band and the 5 GHz band, and handles the

two bands as two separate wireless networks to help manage the traffic.

The most common way to split wireless traffic is to use the 2.4 GHz band for

basic Internet tasks such as web browsing, email, and downloads, and use

the 5.0 GHz band for streaming multimedia. There are several reasons for this

approach:

• Although the 2.4 GHz band may be more crowded with wireless traffic

from your neighbors, it’s fine for basic Internet traffic that is not time-

sensitive (such as e-mail).

• Even though you are connected to your own wireless network, you are

still sharing “air time” with nearby networks.

• The 5 GHz band is much less crowded than the 2.4 GHz band, so it’s ideal

for streaming multimedia.

• The 5 GHz band has more available channels, so it is more likely that you

will have your own, interference-free channel for your wireless network.

By default, your dual-band router uses the same network name on both the

2.4 GHz band and the 5 GHz band. If you are connecting to your router with

a computer that has a dual-band wireless network adapter, you might not be

able to determine which band you’re using. The easiest way to segment your

traffic is to rename one of your wireless networks. With a separate, descriptive

name, it will be easy to connect to the right network.

To reconfigure your wireless network:

Wireless > Basic Wireless Settings

Log into the browser-based utility (see “How to open the browser-based

utility” on page 21).

Click the Wireless tab, then click the Basic Wireless Settings page.

Click Manual. This enables you to make changes to all of the fields below.

Network Mode—Your choice depends upon the clients that will

connect to your network. If all of your devices are Wireless-N capable,

you can select Wireless-N Only for either or both bands.

On the 5 GHz band, you can select:

• Mixed (default), which accepts connections from 802.11a or

802.11n clients

• Wireless-A Only (802.11a only)

• Wireless-N Only (802.11n only)

• Disabled, which disables the 5.0 GHz band on this router

On the 2.4 GHz band, you can select:

• Mixed

• Wireless-B/G Only

• Wireless-B only

• Wireless-G Only

• Wireless-N Only

• Disabled

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys E2500 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys E2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info