Bedienungsanleitung Linksys E800 - N150 Wi-Fi Router (Seite 20 von 46) (Englisch)

602230

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Setting Up: Advanced

Linksys E800

In the Category drop-down list, select the type of item you want to set a

priority for. A list of installed items fitting that description appears.

TIP

Do not set all priorities to High, because all items will have the

same priority, and it would be easier to disable Internet Access

Priority for the same result.

• Applications and Online Games—Let you assign a priority for an

application or online game.

Select the application or online game that you want to add from

the drop-down list, then select the priority.

Click Apply, then click Save Settings.

TIP

If you want to add a new application or game, you need to know

its port and protocol information (see the application or game’s

documentation for help).

• MAC Address and Voice Device—Let you prioritize network traffic

based on the device that is accessing the network. For example, if you

want your gaming console to have higher priority than your computer

for accessing the Internet, you can assign a higher priority to your

game console using its MAC address. We recommend giving any voice

devices a high priority.

Select MAC Address or Voice Device from the drop-down list,

then enter the name of the device you want to add.

Enter the device’s 12-digit MAC address, then select the priority.

Click Apply, then click Save Settings.

TIP

You can often find a device’s 12-digit MAC address on the bottom

of the device. Or, if the device is connected to your network and

turned on, you can click the Administration tab in the router’s

browser-based utility, click the Local Network page, then click

DHCP Client Table.

Configure Upstream Bandwidth.

• To allow the router to detect the maximum, select Auto (default). Auto

sets speeds in multiples of 512 Kbps.

• To specify the maximum, select Manual, then select the bandwidth

you want it to use.

CAUTION

If you specify a maximum bandwidth that is too high, the router

cannot apply priorities correctly, and QoS problems may result.

When you are done setting priorities, click Save Settings.

How to remotely change your router

settings

Why would I want to remotely change my router settings? There may be

times when you want to change settings for remote file access while you are

away from home.

To set up remote access:

Administration > Management

Log into the browser-based utility (see “How to open the browser-based

utility” on page 25).

Click the Administration tab, then click the Management page and

locate the Remote Management Access settings in the middle of the

screen.

For Remote Management, select Enabled.

For Access via, select HTTP (default) or select HTTPS to use SSL (Secure

Socket Layer) to encrypt data transmitted for higher security.

To be able to upgrade your router’s firmware remotely, select Enabled

next to Remote Upgrade.

To allow remote access from anywhere on the Internet, select Any IP

Address (default) next to Allowed Remote IP Address. Otherwise, enter a

range of allowed IP addresses.

For Remote Management Port, keep the setting of 8080 (default) unless

you already have a device on your network that uses port 8080 (such as

a web camera).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys E800 - N150 Wi-Fi Router Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info