Bedienungsanleitung Linksys E800 - N150 Wi-Fi Router (Seite 26 von 46) (Englisch)

602230

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Setting Up: Advanced

Linksys E800

To use their DNS:

Setup > Basic Setup

Log into the browser-based utility (see “How to open the browser-based

utility” on page 25).

Click the Setup tab, then click the Basic Setup page.

Complete the Static DNS fields with the information provided by your

content filtering provider.

Click Save Settings.

To extend your network

This topic covers cases three and four above.

NOTE

This is a complex process, so this procedure assumes that you have

some networking knowledge.

To extend your network or add wireless capabilities:

If you want to extend your network, you may also follow the instructions

above. One example of this might be to provide a separate wireless

network for your children to keep their wireless network traffic separate

from your wireless network. You might also want to isolate one network

from another network so that network shares aren’t visible across

networks. In this case, use an Ethernet cable to connect the Internet

port of the downstream router to one of the LAN ports of the upstream

router. Make sure that the local network subnets on the two routers are

different.

- OR -

You can extend your network by turning the downstream router into an

access point. (See “How to use a router as an access point” on page19).

When you use a router as an access point, computers connected to the

access point are on the same IP subnet as all other devices connected to

the router. File, printer, and media sharing is much easier if all devices are

on the same subnet.

How to expose a device to the Internet

Why would I expose a device to the Internet? If you are operating a web

server, a mail server, or a web camera, you may want to expose that device to

the Internet so anybody can access it. Your router includes a DMZ (Demilitarized

Zone) feature that forwards all inbound ports presented on the WAN interface,

except those that are specifically forwarded, to an individual IP address or

MAC address. This feature is normally not used, because it presents significant

security risks to the device that you designate for the DMZ. The DMZ device is

not protected by the built-in firewalls, Internet filters, or router web filters, and

is open to attacks from hackers.

A much better way of “exposing” devices to the Internet would be to use port

forwarding. See “How to set up port forwarding” on page57.

To set up a device in the DMZ:

Applications & Gaming > DMZ

Configure your device with a static IP address. See your device’s

documentation for help with setting a static IP address or use DHCP

reservation (see “How to set up the DHCP server on your router” on

page13).

Log into the browser-based utility (see “How to open the browser-based

utility” on page 25).

Click the Applications & Gaming tab, then click the DMZ page.

Select Enabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys E800 - N150 Wi-Fi Router Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info