Bedienungsanleitung Linksys EA4500 - N900 (Seite 37 von 144) (Englisch, Französisch)

602499

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Setting Up: Advanced

Linksys EA-Series

How to get the most out of your dual-

band router

I bought a dual band router, but I’m not sure that I’m getting the most

out of it. What should I check? Of the many reasons for owning a dual-band

router, the most common is to ensure available bandwidth for streaming high-

definition video. At the same time, owners want to make sure that their video

streams won’t be interrupted by other wireless network traffic. To get the most

out of your dual-band router, you can:

• Upgrade your wireless clients

• Split your traffic

Upgrade your wireless clients

If you have network adapters that support only legacy wireless network

standards such as 802.11b, you should consider upgrading them with

Wireless-N (802.11n) network adapters. Wireless-B (802.11b) devices can slow

your entire wireless network. For the best performance, all of your wireless

devices should support Wireless-N. You can then select Wireless-N Only as your

Network Mode below.

NOTE

If you select Wireless-N Only, you may need to temporarily change

your network settings to Mixed to provide access to guests without

Wireless-N networking.

Split your traffic

The best way to improve your multimedia wireless performance is to split your

wireless traffic between your router’s two bands (ranges of radio frequencies).

Your router supports the 2.4 GHz band and the 5 GHz band, and handles the

two bands as two separate wireless networks to help manage the traffic.

The most common way to split wireless traffic is to use the 2.4GHz band for

basic Internet tasks such as web browsing, email, and downloads, and use

the 5.0GHz band for streaming multimedia. There are several reasons for this

approach:

• Although the 2.4GHz band may be more crowded with wireless traffic

from your neighbors, it’s fine for basic Internet traffic that is not time-

sensitive (such as e-mail).

• Even though you are connected to your own wireless network, you are

still sharing “air time” with nearby networks.

• The 5GHz band is much less crowded than the 2.4 GHz band, so it’s ideal

for streaming multimedia.

• The 5GHz band has more available channels, so it is more likely that you

will have your own, interference-free channel for your wireless network.

By default, your dual-band router uses the same network name on both the

2.4GHz band and the 5GHz band. The easiest way to segment your traffic is to

rename one of your wireless networks. With a separate, descriptive name, it will

be easy to connect to the right network.

To reconfigure your wireless network:

Log into Linksys Smart Wi-Fi. (See “How to configure your router” on page

14.

Under Router Settings, click Wireless. The Wireless page opens to the

Wireless tab.

Click Edit next to the network band you want to modify. Change any of

the settings below:

Enabled—Deselect this checkbox to disable the network band.

Network name (SSID)—You can provide a unique SSID for each band

of your wireless network. The name must not exceed 32 characters.

Password—You can provide a unique password for each band of

your wireless network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys EA4500 - N900 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info