Bedienungsanleitung Linksys EA4500 - N900 (Seite 55 von 144) (Englisch, Französisch)

602499

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Port Forwarding and Port Triggering

Linksys EA-Series

How to set up port forwarding for multiple ports

Why would I set up port forwarding for multiple ports? Port forwarding is

a feature that forwards inbound traffic from the Internet on a specific port to

a single device on your local network. Unlike a web camera that typically only

requires a single port to be forwarded, some applications require forwarding

of multiple ports. VNC (Virtual Network Computing) software that allows you to

operate your computer remotely from anywhere on the Internet is an example

of an application that requires multiple ports to be forwarded. To forward to

multiple ports, just create additional entries to forward additional ports to the

same IP address.

Example: You want to set up your computer so you can remotely access it using

VNC software. By default, VNC uses TCP ports 5800 and 5900.

To set up single port forwarding for multiple ports:

Make sure that the software you want to use has been installed onto a

networked computer.

Log into Linksys Smart Wi-Fi. (See “How to configure your router” on page

14.

Set up DHCP reservation for the IP address of the computer on which

you installed the software. (See “How to set up the DHCP server on your

router” on page 38).

Under Router Settings, click Security.

Click the Apps and Gaming tab.

Click Single Port Forwarding. The Single Port Forwarding screen opens.

Click Add a new Single Port Forwarding.

In the Application name field, enter a descriptive name.

Enter in the same port number for the External Port and the Internal

Port.

10.

In the Protocol drop-down list, select TCP, UDP, or Both (default).

11.

In the Device IP# field, enter the last three digits of the IP address you

have reserved for the computer you want to forward Internet traffic to.

The rest of the IP address has already been completed for you.

12.

Select Enabled, then click Save. If you don’t want to use port forwarding

but want to keep the information in the table, unselect the checkbox.

NOTE

If you want to use software such as VNC on multiple computers,

you will need to reconfigure the default ports that VNC uses on

each additional computer. Then, create additional port forwarding

entries for each additional computer. See your software’s

documentation for help.

How to set up port forwarding for a range of ports

Why would I set up port forwarding for a range of ports? Port forwarding is

a feature that forwards inbound traffic from the Internet on a range of ports to

a single device on your local network. Unlike a web camera that typically only

requires a single port to be forwarded, some applications require forwarding

to a range of ports.

Example: You want to set up your computer so you can use BitTorrent, a

popular peer-to-peer file sharing application. BitTorrent uses port 6881 by

default. If that port is busy, the requesting BitTorrent client tries the next port

in sequence. The most common configuration for home routers with a single

BitTorrent computer is to set up port forwarding using a range of ports starting

with 6881 and ending with port 6889.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys EA4500 - N900 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info