Bedienungsanleitung Linksys EA6300 (Seite 30 von 124) (Englisch, Französisch)

517519

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Setting Up: Advanced

Linksys EA-Series

Network mode—Your choice depends upon the clients that will

connect to your network. If all of your devices are Wireless-N capable,

you can select Wireless-N Only for either or both bands.

On the 2.4 GHz band, you can select:

• Mixed

• Wireless-N Only

• Wireless-G Only

On the 5 GHz band, you can select:

• Mixed (default), which accepts connections from 802.11a or

802.11n clients

• Wireless-N Only (802.11n only)

• Wireless-AC Only

Security mode—You can set up different security options for the

5GHz and 2.4GHz networks. If the security mode you select requires

a passphrase, a Passphrase field appears, and you must enter a

passphrase. You can select:

• None (no security)

• WEP

• WPA Personal

• WPA Enterprise

• WPA2 Personal

• WPA2 Enterprise

• WPA2/WPA Mixed Personal

• WPA2/WPA Mixed Enterprise

TIP

Wireless-N networks should use the WP2-Personal security

mode for best performance.

Channel width—We recommend that you keep the default (Auto)

setting for each band. In Auto mode, the router and the network

clients automatically switch to the 40MHz mode if:

• Your wireless clients support the 40 MHz mode (sometimes

called Bonded mode) in which two 20MHz channels are bonded

together for better performance.

• There is no adjacent interference.

With more available channels and less chance of interference on the

5GHz band, you have the option to force the 40MHz mode.

On the 2.4GHz band, you can select:

• Auto (20 MHz or 40 Mhz)

• 20 MHz Only

On the 5GHz band, you can select:

• Auto (automatically selects from the options below)

• 20 MHz Only

• 40 MHz Only

• 80 MHz Only

Channel—Choose the operating channel for each band. Your

router will automatically select the channel with the least amount

of interference if you leave the default Auto setting. We recommend

keeping the default settings for both bands.

To save your changes, click OK.

How to control access to your network

Why would I need to control access to my wireless network? By default,

Setup enables industry-standard WPA (Wi-Fi Protected Access) security using

WPA2/WPA mixed mode. If you set up your wireless network manually and

have not enabled wireless security, your wireless network will be an “open”

network that almost anyone nearby with a Wi-Fi-enabled device could access.

What is MAC filtering? If you choose not to use the built-in security features

of your router, you can still control access to your wireless network using

MAC filtering. Every network device has a unique, 12-digit MAC (Media

Access Control) address. Using MAC filtering, you can allow only known MAC

addresses (known devices) onto your network. You can also exclude specific

MAC addresses or deny them access to your wireless network.

TIP

MAC filtering is not strong security. The best way to secure your

network is to use the router’s WPA2 security setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys EA6300 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys EA6300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info