Bedienungsanleitung Linksys EA6300 (Seite 41 von 124) (Englisch, Französisch)

517519

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Setting Up: Advanced

Linksys EA-Series

To reconfigure the wireless network on your old router:

Open the wireless network setup page.

Change the network name (SSID) to match the name of your new

network. Having the same network name and security settings

enables you to seamlessly roam between your new router and your

old router.

Change the security mode to match the security mode on your new

router.

Change the passphrase (sometimes called the pre-shared key) on

your old router to match the passphrase on your new router.

Change the wireless channel to a non-conflicting channel. Some

manufacturers have an “Auto” function for channel selection that

automatically selects a wireless channel that does not interfere with

other nearby wireless networks. If your old router supports an Auto

function, select that. Otherwise, you may need to manually select the

wireless operating channel on your old router. In the 2.4 GHz wireless

spectrum, there are only three non-overlapping channels: 1, 6, and

11. Pick a channel that does not overlap the operating channel of your

new router. For example, if your new router is operating on channel

11, configure your old router for either channel 1 or channel 6.

Connect an Ethernet network cable to one of the LAN/Ethernet ports on

your old router and an Ethernet port on your new router.

CAUTION

Do not connect the cable to the Internet port on your old router. If

you do, you may not be able to set up the router as an access point

on the current network.

How to put your new router behind an

existing router

Why would I put my new router behind an existing router? There are several

possible scenarios in which you might want to use your new router “behind”

another router:

You might be in an environment that shares the landlord’s Internet

connection with all tenants. In this case, you should put your own router

behind the landlord’s router in order to create your own private network

and to isolate computers on your network from the rest of the building.

You are sharing an office building Internet connection, and you want to

control Internet access or the content viewed by your employees.

You already have an existing network and you want to extend the

network’s range or add wireless capabilities to your network.

You want to separate older, less secure network devices from the rest of

the network.

To add your router to an existing router or gateway

In most cases, you can easily add your router to an existing wireless network by

running Linksys Smart Wi-Fi. If you are unable to set up the additional router

using the instructions below, see “To share an Internet connection” on page39

or “To extend your network” on page41.

To add your router to your existing wireless network:

Connect your router’s Internet port to the LAN/Ethernet port on your

existing (upstream) router or gateway.

Connect to the secure wireless name shown in the Quick Start Guide that

came with your router. (You can change the network name and password

later during router setup.) If you need help connecting to the network,

refer to your device documentation. Note: You will not have Internet

access until router setup is complete.

Open a web browser and follow the instructions to complete your

router’s setup. If instructions do not appear in the web browser, enter

linksyssmartwifi.com in the browser’s address bar.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys EA6300 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys EA6300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info