Bedienungsanleitung Linksys LRT214 (Seite 63 von 77) (Englisch)

727825

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

VPN

Linksys

To add a user to the list: Enter the information identified in NOTE

(below), and click Add to list.

To add another new user: Enter the information identified in NOTE

(below), and click Add to list.

To modify a user on the

list:

Click the entry that you want to modify. Make

changes, and click Update. If you do not need

to make changes, you can click Add New to

deselect the entry and clear the text fields.

To delete a user from the

list:

Click the entry that you want to delete. To

select a block of entries, click the first entry,

hold down the Shift key, and click the final

entry in the block. To select individual entries,

hold down the Ctrl key while clicking. Click

Delete.

NOTE

Username: Enter a name.

New Password: Enter a password.

Confirm New Password: Re-enter the password.

Connection List

The following read-only information appears. You can click Refresh to update

the data.

Username: Name of the PPTP VPN client.

Remote Address: WAN IP address of the PPTP VPN client.

PPTP IP Address: LAN IP address that the PPTP server assigned to the

client upon connection.

EasyLink VPN

Summary

EasyLink VPN replaces the conventional complicated VPN setup process by

entering Server IP, User Name, and Password.

Go to Configuration > EasyLink VPN > Summary to see the summary page.

EasyLink VPN Server Status

Enable Indicates whether EasyLink VPN server is

enabled or disabled. You can go to EasyLink

VPN Server setting page to change the

configuration.

Protocol Indicates current EasyLink VPN handshaking

protocol.

Encryption/ Authentication/

DH Group

Indicates encryption /authentication/ DH

Group mode. For example, 3DES/ MD5/ Group

2 -1024 bit

Config. Click the Edit icon to get into EasyLink VPN

Server setting page.

Inbound EasyLink VPN Status

Use the Rows per page list at the top right corner of the table to decide the number

of rules to display on each page and use the Page list to choose a particular page.

Enable Indicates whether the specified EasyLink VPN client is

enabled or disabled. You can go to Inbound EasyLink VPN

setting page to change the configuration.

Account Indicates the user names of remote clients.

Status The status of the tunnel: Connected or Waiting for Connection.

Local Group The setting for VPN connection secure group of the local end.

Remote Gateway The IP address of the Remote Gateway.

Remote Group Setting for remote VPN connection secure group.

Tunnel Test Click Connect to verify the tunnel status. The test result will

be updated.

To disconnect, click Disconnect to stop the VPN connection.

To delete tunnel settings, select a tunnel, and then click the

Delete icon.

Config. Click the Edit icon to get into Inbound EasyLink VPN setting

page. You can also click the trash can icon to delete the client

configuration.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys LRT214 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info