Bedienungsanleitung Linksys SRW2008MP (Seite 25 von 81) (Englisch)

602177

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

Chapter 5

Advanced Configuration

8-Port 10/100/1000 Gigabit Switch with Webview

DNS Server Enter the primary DNS Server information.

Click the Save Settings button to save your changes or

click Cancel Changes to discard the information.

Setup > Time

The Time screen allows you to configure the time settings

for the Switch.

Setup > Time

Set Time

Use System Time When this option is selected, the local

hardware clock is utilized.

Use SNTP Time When this option is selected, the time is

synchronized to an SNTP (Simple Network Time Protocol)

server..

Local Time

Hours The hour can be entered here.

Minutes The minutes can be entered here.

Seconds The seconds can be entered here.

Month The month can be entered here.

Day The day can be entered here.

Year The year can be entered here.

Time Zone Enter the difference between Greenwich

Mean Time (GMT) and local time.

Daylight Saving

Daylight Saving Select Daylight Saving to enable it on

the Switch. If the Switch should use US daylight savings,

then select USA. If the Switch should use EU daylight

savings, then select European. If it should use another

kind of daylight savings, then select Custom and complete

the From and To fields.

Time Set Offset (1-1440) For non-US and European

countries, specify the amount of time for daylight savings.

The default is 60 minutes.

From If you selected Other for the Daylight Saving

setting, then enter the date and time when daylight

savings begins.

To If you selected Other for the Daylight Saving setting,

then enter the date and time when daylight savings ends.

Recurring If you selected Other for the Daylight Saving

setting and daylight savings has the same start and end

dates and times every year, then select Recurring.

From If you selected Recurring, then enter the date and

time when daylight savings begins.

To If you selected Recurring, then enter the date and time

when daylight savings ends.

SNTP Servers

Server1 Enter the primary SNTP server here.

Server2 Enter a secondary SNTP server here.

SNTP Polling Interval (60-86400) The value defined

here determines the amount of time (in seconds) before

the Switch polls the SNTP server. The default value is every

1024 seconds (approx. 17 minutes).

Click the Save Settings button to save your changes or

click Cancel Changes to discard the information.

Port Management > Port Settings

The Port Management > Port Settings screen shows you the

settings for each of the Switch’s ports.

Port The number of the port. To use an SFP module, click

on the Detail button of the appropriate port (G1, G2).

Description Displays a brief description of the port (can

be entered by clicking on the Detail button).

Administrative Status The port can be taken offline by

selecting the Down option. When Up is selected, the port

can be accessed normally.

Link Status Up indicates a port has an active connection,

Down indicates there is no active connection or the port

has been taken offline by an Administrator.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys SRW2008MP Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info