Bedienungsanleitung Linksys WAP610N (Seite 14 von 41) (Englisch)

612980

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

Chapter 3

Advanced Configuration

Wireless-N Access Point with Dual-Band

Wireless > Advanced Wireless Settings

Configure the Access Point’s advanced wireless functions.

These settings should only be adjusted by an expert

administrator as incorrect settings can reduce wireless

performance.

Wireless > Advanced Wireless Settings

NOTE: The settings on the Advanced Wireless

Settings screen are designed for advanced users

only.

Advanced Wireless

AP Isolation This isolates all wireless clients and wireless

devices on your network from each other. Wireless devices

will be able to communicate with the Access Point but not

with each other. To use this function, select Enabled. AP

Isolation is disabled by default.

Authentication Type The Authentication Type setting

is available if the Security mode is WEP. The default is

set to Auto, which allows either Open System or Shared

Key authentication to be used. With Open System

authentication, the sender and the recipient do NOT

use a WEP key for authentication. With Shared Key

authentication, the sender and recipient use a WEP key for

authentication. Select Shared Key to only use Shared Key

authentication.

Basic Rate The Basic Rate setting is not actually one rate

of transmission but a series of rates at which the Access

Point can transmit. The Access Point will advertise its

Basic Rate to the other wireless devices in your network,

so they know which rates will be used. The Access Point

will also advertise that it will automatically select the best

rate for transmission. The default setting is Default, when

the Access Point can transmit at all standard wireless

rates (1-2Mbps, 5.5Mbps, 11Mbps, 18Mbps, and 24Mbps).

Other options are 1-2Mbps, for use with older wireless

technology, and All, when the Access Point can transmit

at all wireless rates. The Basic Rate is not the actual rate of

data transmission. If you want to specify the Access Point’s

rate of data transmission, configure the Transmission Rate

setting.

Transmission Rate The Transmission Rate setting is

available if the Network Mode is set to Wireless-B/G Only,

Wireless-G Only, Wireless-B Only, Wireless-A Only, or Mixed.

The rate of data transmission should be set depending on

the speed of your wireless network. You can select from

a range of transmission speeds, or you can select Auto

to have the Access Point automatically use the fastest

possible data rate and enable the Auto-Fallback feature.

Auto-Fallback will negotiate the best possible connection

speed between the Access Point and a wireless client. The

default is Auto.

N Transmission Rate The N Transmission Rate setting is

available if the Network Mode is set to Mixed or Wireless-N

Only. The rate of data transmission should be set

depending on the speed of your Wireless-N networking.

You can select from a range of transmission speeds, or you

can select Auto to have the Access Point automatically

use the fastest possible data rate and enable the Auto-

Fallback feature. Auto-Fallback will negotiate the best

possible connection speed between the Access Point and

a wireless client. The default is Auto.

Transmission Power This option sets the percentage

of maximal transmit power relative to the regulatory

domain restrictions. For example, if the regulatory domain

restriction allows transmissions of up to 20 dB, then setting

the percentage at 50% allows maximal transmit power of

10 dB. Select the percentage you want to use: 12%, 25%,

50%, or 100%. The default is 100%.

CTS Protection Mode The Access Point will automatically

use CTS (Clear-To-Send) Protection Mode when your

Wireless-N and Wireless-G products are experiencing

severe problems and are not able to transmit to the

Access Point in an environment with heavy 802.11b traffic.

This function boosts the Access Point’s ability to catch all

Wireless-N and Wireless-G transmissions but will severely

decrease performance. The default is Auto. To disable this

option, select Disabled.

Beacon Interval Enter a value between 20 and 1000

milliseconds. The Beacon Interval value indicates the

frequency interval of the beacon. A beacon is a packet

broadcast by the Access Point to synchronize the wireless

network. The default value is 100.

DTIM Interval This value, between 1 and 255, indicates

the interval of the Delivery Traffic Indication Message

(DTIM). A DTIM field is a countdown field informing

clients of the next window for listening to broadcast and

multicast messages. When the Access Point has buffered

broadcast or multicast messages for associated clients, it

sends the next DTIM with a DTIM Interval value. Its clients

hear the beacons and awaken to receive the broadcast

and multicast messages. The default value is 1.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys WAP610N Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info