Bedienungsanleitung Linksys WRT160N (Seite 23 von 448) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

53020

Zoom out

Zoom in

Vorherige Seite

1/448

Nächste Seite

Chapter 3

Advanced Configuration

Wireless-N Broadband Router

Triggered Range For each application, enter the starting

and ending port numbers of the triggered port number

range. Check with the Internet application documentation

for the port number(s) needed.

Forwarded Range For each application, enter the starting

and ending port numbers of the forwarded port number

range. Check with the Internet application documentation

for the port number(s) needed.

Enabled Select Enabled to enable port triggering for the

applications you have defined.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Applications and Gaming > DMZ

The DMZ feature allows one network computer to be

exposed to the Internet for use of a special-purpose

service such as Internet gaming or videoconferencing.

DMZ hosting forwards all the ports at the same time to

one PC. The Port Range Forwarding feature is more secure

because it only opens the ports you want to have opened,

while DMZ hosting opens all the ports of one computer,

exposing the computer to the Internet.

Applications and Gaming > DMZ

DMZ

Any PC whose port is being forwarded must have its DHCP

client function disabled and should have a new static IP

address assigned to it because its IP address may change

when using the DHCP function.

Enabled/Disabled To disable DMZ hosting, select

Disabled. To expose one PC, select Enabled. Then

configure the following settings:

Source IP Address If you want any IP address to be the

source, select Any IP Address. If you want to specify an IP

address or range of IP addresses as the designated source,

select and complete the IP address range fields.

Destination If you want to specify the DMZ host by IP

address, select IP Address and enter the IP address in

the field provided. If you want to specify the DMZ host

by MAC address, select MAC Address and enter the MAC

address in the field provided. To retrieve this information,

click DHCP Client Table.

DMZ > DHCP Client Table

DHCP Client Table

The DHCP Client Table lists computers and other

devices that have been assigned IP addresses by the

Router. The list can be sorted by Client Name, Interface,

IP Address, MAC Address, and Expired Time (how much

time is left for the current IP address). To select a DHCP

client, click Select. To retrieve the most up-to-date

information, click Refresh. To exit this screen and

return to the DMZ screen, click Close.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Applications and Gaming > QoS

Quality of Service (QoS) ensures better service to

high-priority types of network traffic, which may

involve demanding, real-time applications, such as

videoconferencing.

Applications and Gaming > QoS

QoS (Quality of Service)

Wireless

You can configure the support and No Acknowledgement

settings in this section.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys WRT160N Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys WRT160N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info