Bedienungsanleitung Linksys WRT160N (Seite 14 von 38) (Englisch)

53020

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Chapter 3

Advanced Configuration

Wireless-N Broadband Router

Standard Channel If you selected Wide - 40MHz Channel

or Standard - 20MHz Channel for the Radio Band setting,

then this setting will be available. Select the channel for

Wireless-N, Wireless-G, and Wireless-B networking. If

you selected Wide – 40MHz Channel for the Radio Band

setting, then the Standard Channel will be a secondary

channel for Wireless-N.

SSID Broadcast When wireless clients survey the local

area for wireless networks to associate with, they will

detect the SSID broadcast by the Router. To broadcast the

Router’s SSID, keep the default setting, Enabled. If you

do not want to broadcast the Router’s SSID, then select

Disabled.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Wi-Fi Protected Setup

There are three methods available. Use the method that

applies to the client device you are configuring.

Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)

Wi-Fi Protected Setup > Congratulations

NOTE: Wi-Fi Protected Setup configures one

client device at a time. Repeat the instructions

for each client device that supports Wi-Fi

Protected Setup.

Method #1

Use this method if your client device has a Wi-Fi Protected

Setup button.

Click or press the Wi-Fi Protected Setup button on

the client device.

Click the Wi-Fi Protected Setup button on this

screen.

After the client device has been configured, click

OK. Then refer back to your client device or its

documentation for further instructions.

Method #2

Use this method if your client device has a Wi-Fi Protected

Setup PIN number.

Enter the PIN number in the field on this screen.

Click Register.

After the client device has been configured, click

OK. Then refer back to your client device or its

documentation for further instructions.

Method #3

Use this method if your client device asks for the Router’s

PIN number.

Enter the PIN number listed on this screen. (It is also

listed on the label on the bottom of the Router.)

After the client device has been configured, click

OK. Then refer back to your client device or its

documentation for further instructions.

The Wi-Fi Protected Setup Status, Network Name (SSID),

Security, Encryption, and Passphrase are displayed at the

bottom of the screen.

NOTE: If you have client devices that do not

support Wi-Fi Protected Setup, note the wireless

settings, and then manually configure those

client devices.

Wireless > Wireless Security

The Wireless Security screen configures the security of

your wireless network. There are six wireless security

mode options supported by the Router: WPA Personal,

WPA Enterprise, WPA2 Personal, WPA2 Enterprise, RADIUS,

and WEP. (WPA stands for Wi-Fi Protected Access, which

is a security standard stronger than WEP encryption. WEP

stands for Wired Equivalent Privacy, while RADIUS stands

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys WRT160N Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys WRT160N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info