Bedienungsanleitung Linksys WRT160N (Seite 23 von 38) (Englisch)

53020

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Chapter 3

Advanced Configuration

Wireless-N Broadband Router

Applications and Gaming > DMZ

DMZ

Any PC whose port is being forwarded must have its DHCP

client function disabled and should have a new static IP

address assigned to it because its IP address may change

when using the DHCP function.

Enabled/Disabled To disable DMZ hosting, select

Disabled. To expose one PC, select Enabled. Then

configure the following settings:

Source IP Address If you want any IP address to be the

source, select Any IP Address. If you want to specify an IP

address or range of IP addresses as the designated source,

select and complete the IP address range fields.

Destination If you want to specify the DMZ host by IP

address, select IP Address and enter the IP address in

the field provided. If you want to specify the DMZ host

by MAC address, select MAC Address and enter the MAC

address in the field provided. To retrieve this information,

click DHCP Client Table.

DMZ > DHCP Client Table

DHCP Client Table

The DHCP Client Table lists computers and other

devices that have been assigned IP addresses by the

Router. The list can be sorted by Client Name, Interface,

IP Address, MAC Address, and Expired Time (how

much time is left for the current IP address). To select

a DHCP client, click Select. To retrieve the most up-to-

date information, click Refresh. To exit this screen and

return to the DMZ screen, click Close.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Applications and Gaming > QoS

Quality of Service (QoS) ensures better service to

high-priority types of network traffic, which may

involve demanding, real-time applications, such as

videoconferencing.

Applications and Gaming > QoS

QoS (Quality of Service)

Wireless

You can configure the support and No Acknowledgement

settings in this section.

WMM Support If you have other devices that support Wi-

Fi Multimedia (WMM) on your network, keep the default,

Enabled. Otherwise, select Disabled.

No Acknowledgement If you want to disable the Router’s

Acknowledgement feature, so the Router will not re-send

data if an error occurs, then select Enabled. Otherwise,

keep the default, Disabled.

Internet Access Priority

In this section, you can set the bandwidth priority for a

variety of applications and devices. There are four levels

priority: High, Medium, Normal, or Low. When you set

priority, do not set all applications to High, because this will

defeat the purpose of allocating the available bandwidth.

If you want to select below normal bandwidth, select Low.

Depending on the application, a few attempts may be

needed to set the appropriate bandwidth priority.

Enabled/Disabled To use the QoS policies you have set,

keep the default, Enabled. Otherwise, select Disabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys WRT160N Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys WRT160N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info