Bedienungsanleitung Linksys WRT54 (Seite 30 von 81) (Englisch)

97358

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

Chapter 6: Configuring the Wireless-G Broadband Router

The Wireless Tab - Advanced Wireless Settings

Wireless-G Broadband Router

The Wireless Tab - Advanced Wireless Settings

This tab is used to set up the Router’s advanced wireless functions. These settings should only be adjusted by an

expert administrator as incorrect settings can reduce wireless performance.

Authentication Type. The default is set to Auto, which allows either Open System or Shared Key authentication

to be used. With Open System authentication, the sender and the recipient do NOT use a WEP key for

authentication. With Shared Key authentication, the sender and recipient use a WEP key for authentication.

Basic Rate. The Basic Rate setting is not actually one rate of transmission but a series of rates, advertising to the

other wireless points in your network at what rates the Router can transmit. At the default setting, the Router will

advertise that it will Automatically select the best rate for transmission. Other options of rates to advertise are

1-2Mbps, for use with older wireless technology, and All, when you wish to make all rates advertised. The Basic

Rate is not the rate transmitted; that is the Transmission Rate.

Transmission Rate. The rate of data transmission should be set depending on the speed of your wireless

network. You can select from a range of transmission speeds, or you can select Auto to have the Router

automatically use the fastest possible data rate and enable the Auto-Fallback feature. Auto-Fallback will

negotiate the best possible connection speed between the Router and a wireless client. The default value is Auto.

CTS Protection Mode. This should remain disabled unless having severe problems with your Wireless-G

products not being able to transmit to the Router. This function boosts the Router’s ability to catch all 802.11b

and Wireless-G transmissions but will severely decrease performance.

Frame Burst. Enabling this option should provide your network with greater performance, varying upon the

manufacturer of your wireless products.

Beacon Interval. The default value is 100. Enter a value between 1 and 65,535 milliseconds. The Beacon

Interval value indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Router to

synchronize the wireless network.

DTIM Interval. This value, between 1 and 16384, indicates the interval of the Delivery Traffic Indication Message

(DTIM). A DTIM field is a countdown field informing clients of the next window for listening to broadcast and

multicast messages. When the Router has buffered broadcast or multicast messages for associated clients, it

sends the next DTIM with a DTIM Interval value. Its clients hear the beacons and awaken to receive the broadcast

and multicast messages. The default value is 1.

Figure 6-18: Wireless Tab - Advanced Wireless Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys WRT54 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys WRT54

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info