Bedienungsanleitung Linksys WRT54 (Seite 48 von 81) (Englisch)

97358

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

Appendix A: Troubleshooting

Common Problems and Solutions

Wireless-G Broadband Router

4. Check the protocol you will be using, TCP and/or UDP.

5. Enter the IP address of the PC or network device that you want the port server to go to. For example,

if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the field

provided. Check “Appendix D: Finding the MAC Address and IP Address for Your Ethernet Adapter” for

details on getting an IP address.

6. Check the Enable option for the port services you want to use. Consider the example below:

Customized External Port TCP UDP IP Address Enable

Application

UT 7777 to 27900 X X 192.168.1.100 X

Halflife 27015 to 27015 X X 192.168.1.105 X

PC Anywhere 5631 to 5631 X 192.168.1.102 X

VPN IPSEC 500 to 500 X 192.168.1.100 X

When you have completed the configuration, click the Save Settings button.

9. I can’t get the Internet game, server, or application to work.

If you are having difficulties getting any Internet game, server, or application to function properly, consider

exposing one PC to the Internet using DeMilitarized Zone (DMZ) hosting. This option is available when an

application requires too many ports or when you are not sure which port services to use. Make sure you

disable all the forwarding entries if you want to successfully use DMZ hosting, since forwarding has priority

over DMZ hosting. (In other words, data that enters the Router will be checked first by the forwarding

settings. If the port number that the data enters from does not have port forwarding, then the Router will send

the data to whichever PC or network device you set for DMZ hosting.)

• Follow these steps to set DMZ hosting:

1. Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the Router.

Go to the Applications & Gaming => Port Forwarding tab.

2. Disable or remove the entries you have entered for forwarding. Keep this information in case you

want to use it at a later time.

3. Go to the Applications & Gaming => DMZ tab.

4. Select Enable next to DMZ. In the DMZ Host IP Address field, enter the IP address of the computer you

want exposed to the Internet. This will bypass the NAT technology for that computer. Please refer to

“Appendix D: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on

getting an IP address.

• Once completed with the configuration, click the Apply button.

10.I forgot my password, or the password prompt always appears when I am saving settings to the

Router.

• Reset the Router to factory default by pressing the Reset button for 10 seconds and then releasing it. If

you are still getting prompted for a password when saving settings, then perform the following steps:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys WRT54 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys WRT54

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info