Bedienungsanleitung Linksys WRT54GC compact wireless g broadband router (Seite 24 von 83) (Englisch)

495206

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

Chapter 5: Configuring the Compact Wireless-G Broadband Router

The Setup Tab - Basic Setup

Compact Wireless-G Broadband Router

DHCP Server Settings

The settings allow you to configure the Router’s Dynamic Host Configuration Protocol (DHCP) server function. The

Router can be used as a DHCP server for your network. A DHCP server automatically assigns an IP address to

each computer on your network. If you choose to enable the Router’s DHCP server option, you must make sure

there is no other DHCP server on your network.

DHCP Server. DHCP is enabled by factory default. If you already have a DHCP server on your network, or you

don’t want a DHCP server, then select Disabled (no other DHCP features will be available).

Assign Static DHCP. Every time a PC reboots, it is assigned a new local IP address by the Router. If you want a PC

to be assigned the same IP address every time it reboots, then click the Assign Static IP button.

On the Static DHCP Client List screen, enter a client name, then enter the static local IP address in the Assign this

IP field, and enter the MAC address of the PC in the To this MAC field. Then click the Enabled checkbox. When you

have finished your entries, click the Save Settings button to save your changes. Click the Cancel Changes

button to cancel your changes. To exit this screen, click the Close button.

If you want to see a list of DHCP clients, click the DHCP Client Table button. On the DHCP Client Table screen, you

will see a list of DHCP clients with the following information: Client Names, Interfaces, IP Addresses, and MAC

Addresses. From the To Sort by drop-down menu, you can sort the table by Client Name, Interface, IP Address, or

MAC Address. To view the most up-to-date information, click the Refresh button. To exit this screen, click the

Close button.

Start IP Address. Enter a value for the DHCP server to start with when issuing IP addresses. Because the

Router’s default IP address is 192.168.1.1, the Starting IP Address must be 192.168.1.2 or greater, but smaller

than 192.168.1.254. The default Starting IP Address is 192.168.1.100.

Maximum Number of Users. Enter the maximum number of PCs that you want the DHCP server to assign IP

addresses to. This number cannot be greater than 253. The default is 50.

IP Address Range. The range of DHCP addresses is displayed here.

Client Lease Time. The Client Lease Time is the amount of time a network user will be allowed connection to the

Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased”

this dynamic IP address. After the time is up, the user will be automatically assigned a new dynamic IP address.

The default is 0 minutes, which means one day.

WINS. The Windows Internet Naming Service (WINS) manages each PC’s interaction with the Internet. If you use

a WINS server, enter that server’s IP Address here. Otherwise, leave this blank.

Figure 5-7: Static DHCP Client List

Figure 5-8: DHCP Client Table

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys WRT54GC compact wireless g broadband router Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info